A small device that will help you sorting resistors without wasting time with their color code.
Bridging the gap between professional and DIY/hobbyist bench power supply.
Create a history graph that maps temperature values live on a TFT LCD in seconds. Just edit 2 variables and choose your graph's colour.
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
USB LiPo battery powered, Arduino-based non-contact IR thermometer, stopwatch, inactivity tracker, cooking timer with alarm & 7-Seg Display.
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
Using the VL53LO and an Arduino for distance measurement.
6.4A-2uA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
With a DC range of -25V to +25V, a voltmeter combining analog needle & digital LEDs to represent integer & fractional voltages respectively.
Measuring and monitoring temperature and humidity using raspberry pi and DHT11
One of the widely used, automation and process control devices is the flow meter; it is a device used to measure the flow rate of liquid.
Providing office owners and users with information about comfortability of their workplace.
Just a quick showcase on a handheld, wireless and battery operated distance sensor. Incredibly long-life (8 + years!).
An auto ranging meter with diode/LED, resistance, capacitance, continuity testing capabilities. No Voltage or Current measurements !
Simple weather station Arduino UNO: measures temperature, humidity, air pressure using BMP280, DHT11, windspeed 3D-printed anemometer.
Build a speed monitor using our 24GHz radar evaluation board Sense2GoL and see who's the fastest on the floor!
This is a monophasic and biphasic residential consumption monitoring meter using the ESP32.
A device to measure the height of walls/buildings with high school trigonometry: sensing angle with a 3D magnetic sensor, dot laser & level.
A beginner to mid-level project utilising an inexpensive ultrasonic sensor, an Arduino and some intermediate code language.
A measuring device that also doubles as a burglar alarm, using an ultrasonic sensor and LCD.
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.
The team measured temperature, air pressure, and the methane gas content in a Lane Tech classroom.
Using Wemos D1, an ultrasonic sensor and Thingio.AI IoT platform.
Trying to get a discharge curve of you lithium battery preventing over-discharge? You can get that for less than $10.