OfficeCheck

About

Our application can provide office owners and users with information about comfortability of their workplace.

This project can raise your awerness about your office environment and provide useful tips to make even better for your work or work your colleagues.

Installation and usage

Download and install program etcher.

Download image from our repository and extract it.

In etcher "select image" and find your extracted image file, select sd card and make sure it is empty or there aren't any important data and flash sd card.

We connected BigClown modules in this setup:

Plug BigClown modules to your desktop.

Download firmware and bigclown playground. After BigClown instalation run BigClown playground and select firmware tab. Choose downloaded firmware and connect BigClown modules, select it as device and flash firmware.

Insert sd card into Raspberry PI and power it up. After boot connect to its IP address, login and click "start pairing". For login you should recieve your default password and login name.

Download WinSCP and connect it to your Raspberry PI.

Your device is going to recieve data from modules and it will make a database from those values. Run it on several days to have the most accurate measurement.

Default database file location is

/home/pi/db.db

You can use WinSCP to copy this file to your desktop.

Run our Python desktop app.

Select File -> Open -> Find your database from Raspberry PI.

You can see now measurement datas in our GUI.

If you want, you can export all measurements as pdf report.

Gitlab project: https://gitlab.com/ustredni-topeni-atthack-2019/repo

Thank you for using our project

Yours Ústřední topení team