A nanoFramework + RAKwireless RAK811 module based LoRaWAN client. Tested on The Things Network (TTN) the Spark NZ networks.
Connected beehive project using sensors & open tech to monitor hive health in real-time and protect bees through smart data.
In this post I am going to show how to integrate Sensecap S2103 and display collected data on reTerminal display.
Will guide you to implement Wio E5 with Xiao ESP32 S3 via Micropython.
Discover our connected pet feeder controlled by an Android application, using the LoRa network and made with 3D printed parts.
A. NET Core + RAK3172 module based LoRaWAN client. Tested on The Things Network (TTN) and The Things Stack(TTS).
An Arduino-compatible LoRa development board with ATmega328P, USB programming, and dual voltage regulation for IoT projects.
I came up with the idea of creating a hologram AI that communicates with sound and touch. You can change the menu on the screen. Use capsense
With our sensors in place, we can now start to use some of the data to help create the haven that Dempsey is attempting to manufacture.
BLE Wristband Beacon & LoRaWAN Wearables in Covid-19 Contact Tracing Solution
This is an easy explanation on how to build two LoRa devices and make them communicate with each other. Imagination will then make you rock!
The RangePi made it easier to connect LoRa network from anywhere at any time
I am building base board for Industrial IOT application, with ability to bridging Modbus sensor connection to Lorawan wireless connectivity.
A review of Elecrow's Meshastic devie line including the ThinkNode M1, M2, and the Crowpanel
Utilizing XIAO, Wio-E5(LoRa), let's navigate through the LoRaWAN architecture to enhance my agricultural practices and experiences.
How to set up a FiPy and publish an event or location to Wia.
Measure the environment of a whole city with cheap, changeable and mobile sensors
Things communicate with LORA to a Jeedom Box
Detects and alerts authorities about human entry into restricted areas such as wildlife sanctuaries, protected forests, or sensitive zones.
The Automation kit is basically based on LoRa module and powered by Raspberry Pi RP2040 a 32-bit dual ARM Cortex-M0+ microcontroller
Rugged off-grid E-Ink comms kit for first responders. Reliable mesh messaging, solar-ready, and built for disaster zones.
The ultimate solution for long-range, low-power communication in your IoT projects.
Internal environmental conditions in an office are crucial for the health of employees, with this project you will discover how check them.
Measure, monitor and predict energy consumption
