Diluting Electric Paint. How to do it, and what the consequences are.
You need Arduino UNO and Python 3. Even you can use Python 3.10 (Beta). It is a quite simple project.
Microcontrollers( Introduction)
Works for Arduino Uno R4 WiFi, ESP32 Chips, Raspberry Pi Pico W, HM10, and other BLE modules. Minimal or zero hardware and software changes.
A compact STLINK-V3 adapter converting STDC14 (1.25mm) to 2.54mm headers, with USB & LiPo power options for flexible debugging
This blog contains all the necessary information required to debug your TensorFlow Lite for Microcontrollers applications.
This is a 100Hz inverter (Yes it works like normal 50Hz inverter so dont care about the 100Hz)
Ubuntu Desktop can be broken by a driver update, knowing how to boot straight into the console and remove the problem driver is important.
Debugging a basic binary counter IP from Xilinx-AMD on EDGE-Artix-A7 FPGA.
Debugging of WisBlock with the Arduino IDE and WisBlock
Measurement of unknown resistance using Arduino.
This is a rudimentary 1MHz (tested) oscilloscope with triggering capability written in python
Compact Debugger is an embedded-focused debugger written entirely in pure C with a footprint of roughly 500 KB.
This tool provides a convenient and quick change of a SW image of a device that has an SD Card interface from a remote.
Learn how to use the Arduino Serial Monitor to debug your projects, display sensor data, and even control your board with simple commands.
XSCT script for MPSOC PS-USB 3.0 compliance test for KRIA K26 SOM development flow as an example of a simple registers manipulation tool
The MicroMaster Mini is the next generation of hardware hacking tool.
Open source test bench inspired by NI-CompactDAC
FpgacapZero is a suite of open-source, vendor-agnostic FPGA debug cores. This project added support for it to the BRS-100-GW1NR9.
Replace Serial.print() for your debugging with this function: easier, shorter, code-removable
Event Recorder is a software component supplied in the Keil::ARM_Compiler pack that is part of the MDK installation. Really very powerful an
The BW21-CBV-Kit launched by Ai-Thinker is an open-source hardware development platform for intelligent sensing applications.
A custom STM32-based environmental monitoring system that reads temperature and humidity using bare-metal drivers and display real-time data
Now, you can use I2C_LCD to get running logs anywhere, it will be more convenient.
