FFT spectrum analyzer is a test equipment that uses Fourier analysis and digital signal processing techniques to provide spectrum analysis.
How to correct the drift of this cheap and easy to use RTC
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Use your MKR wifi1010 and an lcd screen to monitor your WiFi signal Strength. It even work with and exernal power supply (exernal battery)
Temperature Sensor With Arduino UNO
Learn how get going with debugging on your Arduino Nano BLE, as well as build your own low cost debugger module in the process!
Continuing with my simple FIR filter Verilog module, this project walks through how to rewrite HDL logic when setup timing violations occur.
Control Arduino from your smartphone or laptop using Bluetooth.
Usable both on-the-field and on-the-desk, with special characteristics. Its scrolling display can be paused and cleared, selectable speed.
LCD Screens and the Arduino Uno
A simple device that consists of Ultrasonic Sensor that will help us measure the height with more accuracy and less error.
Use the Serial Monitor in the Arduino IDE with your ATtiny.
OK! There's the color codes but small as they are we can use a simple "ohmmeter" that just gives us the value with a single move.
If you need to debug your Arduino WifiNINA project remotely, plot charts of monitoring data, and more, this is the project for you...
A stable instrument with display, LED and buzzer to feel the Magnetic Field live.
Integrated Air Quality Sensor - Cubic Air Quality Sensor
Make a power meter for 5v circuits using material from the Arduino Starter Kit
This course demonstrates development tasks such as build, debug, and profile of the Linux environment on the Xilinx Zynq UltraScale+ MPSoC.
A detailed write-up on how to get started with NXP's FRDM-K82F and Running Demo program.
A heartbeat of Arduino and its duty cycle.
Try GDB debugging on your Arduino Uno without an external debugger, so you can solve those bugs and get your project released!
Rainfall Measured Using Arduino
This tutorial walks through a simple demonstration of how to deploy your testbench using Vivado's behavioral simulation.
Code for a controller of a Buck-type DC-DC source, based on the block diagram of a Step-Down Switching Regulator
