“Build a complete Home Automation system using ESP32, Ubidots, and LCSC components! Control lights, fans, and plugs remotely from your smart
We could use a device reminding us of taking a short break to move and give a moment of respite to our eyes.
A system to let someone ask for help at school or in the workplace without having to do it publicly.
Converts input Morse code to letter(letter by letter). Then converts it to sound.
The project consists in creating a smart glove that sends information about hand position to a computer.
How to connect Arduino Yun to QIoT Suite Lite
Explore the CAN features of your Arduino boards and create your communication network, with this easy-to-make Open Source shield.
This is my last project, a dual USB converter to serial and I2C. With this tool, you can listen TX and RX lines at the same time.
The gachapon-sized character that talks and moves its mouth.
A simple LinkIt ONE project that sends an SMS notification when there is a power outage or when power has been restored.
SB Components launched LoRaTM HAT for Raspberry Pi which support 915MHz | 868MHz | 433MHz with Original Semtech SX1262 & SX1268
The Temperature Card is a wearable XIAO and SSD1306-based device that displays the current temperature using an SHT40 sensor.
Unlike any other car project
Interfacing Arduino and Onion Omega2 IoT platform will make creating connected devices easier!
An IP hardwired Nurse Call System based on WIZnet Ethernet HAT + Raspberry Pi Pico
Using an ESP8266 NodeMCU module connected to an MQTT service, we achieve instant intercontinental communication! (One beep at a time.)
Provocation 1: Counter Culture
With a cheap operational amplifier we can built a simple waveform generator which can be used to analyse the circuit behaviour very precise.
Learning braille with the BraillePi and a refreshable braille-display attached is easy and fun at home or at school.
Learn how to set up and use the SIM A7670C 4G LTE board with ESP32 or Arduino — full guide by YaranaIot Guru.
In this introduction, we will introduce how to start with Grove Indoor Environment Kit for Intel Edison (Node.js).
Drivers do lots of things while on the road, looking at road signs, pedestrian detection, driving around obstacles. Here's some assistance.
Connect Two Arduinos using I2C Communication by connecting a DHT11 sensor to the Slave Arduino and Display the Temperature on Master Arduino
SixFab Cellular Modem Kit for Raspberry Pi lets you roam freely and securely with a mobile data connection.
