ardutronic
Published © CC BY-NC-SA

ArduBand - Save Your Eyes!

We could use a device reminding us of taking a short break to move and give a moment of respite to our eyes.

IntermediateFull instructions provided1,286
ArduBand - Save Your Eyes!

Things used in this project

Hardware components

Arduino Nano R3
Arduino Nano R3
×1
SparkFun Triple Axis Accelerometer Breakout - ADXL345
SparkFun Triple Axis Accelerometer Breakout - ADXL345
×1
Buzzer
Buzzer
×1
SparkFun RGB LED Breakout - WS2812B
SparkFun RGB LED Breakout - WS2812B
×1

Software apps and online services

Arduino IDE
Arduino IDE

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)
Solder Flux, Soldering
Solder Flux, Soldering
3D Printer (generic)
3D Printer (generic)

Story

Read more

Custom parts and enclosures

Enclosure - arduBand

Fusion 360 file

Schematics

Eagle schematic - arduBand

Schematic

Eagle board - arduBand

PCB file

Code

arduBand code

C/C++
Code for arduBand
#include <FastLED.h>

#include <Wire.h>
int ADXL345 = 0x53;
float X_out, Y_out, Z_out;
#include <Adafruit_NeoPixel.h>
#include <avr/power.h>

#define DELAYVAL 500

#define PIN 10
#define NUMPIXELS 1
const byte motor = 11;
const byte piezo = 9;
unsigned long minutes;
unsigned long prevMinutes;
int myTime;
int myTime2;
int myPos;

int minMotorVal = 0;
int maxMotorVal = 50;

int a;
int i;

Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);

void setup() {
  Serial.begin(9600);
  pinMode(piezo, OUTPUT);
  pinMode(motor, OUTPUT);
  Wire.begin();
  Wire.beginTransmission(ADXL345);
  Wire.write(0x2D);
  Wire.write(8);
  Wire.endTransmission();
  delay(10);
  pixels.begin();
  pixels.clear();
}
void loop() {
  pixels.clear();
  minutes = millis();
  if (minutes - prevMinutes >= 1000)
  {
    prevMinutes = minutes;
    myTime++;
  }

  if (myTime == 600)
  {
    checkValues();
    checkPosition();
    notification();

    for (int i = 0; i <= 20; i++)
    {
      pixels.setPixelColor(0, pixels.Color(0, 0, i));
      pixels.show();
      delay(10);
    }

    for (int i = 20; i >= 0; i--)
    {
      pixels.setPixelColor(0, pixels.Color(0, 0, i));
      pixels.show();
      delay(10);
    }
  }

  if (myTime == 1200)
  {
    checkValues();
    checkPosition();
    notification();

    for (int i = 0; i <= 20; i++)
    {
      pixels.setPixelColor(0, pixels.Color(0, 0, i));
      pixels.show();
      delay(10);
    }

    for (int i = 20; i >= 0; i--)
    {
      pixels.setPixelColor(0, pixels.Color(0, 0, i));
      pixels.show();
      delay(10);
    }
  }

  if (myTime >= 1800)
  {
    checkValues();
    myPos++;
    notification();
    timeout();
  }

  Serial.print("myTime :");
  Serial.println(myTime);
  Serial.print("myTime2 :");
  Serial.println(myTime2);
  Serial.print("myPos :");
  Serial.println(myPos);
  delay(1000);
}

void checkValues()
{
  Wire.beginTransmission(ADXL345);
  Wire.write(0x32);
  Wire.endTransmission(false);
  Wire.requestFrom(ADXL345, 6, true);
  X_out = ( Wire.read() | Wire.read() << 8);
  X_out = X_out / 256;
  Y_out = ( Wire.read() | Wire.read() << 8);
  Y_out = Y_out / 256;
  Z_out = ( Wire.read() | Wire.read() << 8);
  Z_out = Z_out / 256;
}

void checkPosition()
{
  if (Y_out <= 0.5)
  {
    myPos++;
  }

  if (Y_out > 0.5)
  {
    myPos = 0;
    myTime = 0;
  }
}

void notification()
{
  if (myPos >= 3)
  {
    analogWrite(motor, maxMotorVal);
    delay(500);
    analogWrite(motor, minMotorVal);
    delay(500);
    analogWrite(motor, maxMotorVal);
    delay(500);
    analogWrite(motor, minMotorVal);

    for (int i = 0; i <= 20; i++)
    {
      pixels.setPixelColor(0, pixels.Color(i, 0, 0));
      pixels.show();
      delay(10);
    }

    for (int i = 20; i >= 0; i--)
    {
      pixels.setPixelColor(0, pixels.Color(i, 0, 0));
      pixels.show();
      delay(10);
    }
  }
}

void timeout()
{

  if (Y_out < 0.5)
  {
    myTime2 = myTime;
  }
  if (Y_out >= 0.5)
  {
    myPos = 1;
    if ((myTime2 + 60) == myTime)
    {
      tone(piezo, 1000);
      delay(300);
      tone(piezo, 1000);
      delay(300);
      tone(piezo, 2000);
      delay(300);
      noTone(piezo);
      myPos = 0;
      myTime = 0;
      a = 0;
      for (int i = 0; i <= 20; i++)
      {
        pixels.setPixelColor(0, pixels.Color(0, i, 0));
        pixels.show();
        delay(10);
      }

      for (int i = 20; i >= 0; i--)
      {
        pixels.setPixelColor(0, pixels.Color(0, i, 0));
        pixels.show();
        delay(10);
      }
    }
  }
}

Credits

ardutronic

ardutronic

0 projects • 1 follower

Comments

Related channels and tags
  • Clocks
  • Communication
  • Environmental Sensing
  • Gaming
  • Health & Medical Devices
  • Home Automation
  • Internet of Things
  • Kids & Family
  • Sensors
  • SparkFun
  • Wearables