LoRa HAT is Finally Out! Supports 915MHz | 868MHz | 433MHz

SB Components launched LoRaTM HAT for Raspberry Pi which support 915MHz | 868MHz | 433MHz with Original Semtech SX1262 & SX1268

BeginnerProtip1 hour1,259

LoRa HAT is Finally Out! Supports 915MHz | 868MHz | 433MHz

Things used in this project

Hardware components

Raspberry Pi 4 Model B

SB Components LoRa HAT

Story

The clever, long-range wireless communication technology LoRa™ (Long Range) is facilitating the future of IoT. (Internet of Things).

After launch of Pico LoRaTM Expansion (868MHz & 433MHz) SB Components launched LoRaTM HAT for Raspberry Pi which support 915MHz | 868MHz | 433MHz with Original Semtech SX1262 & SX1268, Communication Range Up to 5 KM and supports Auto Repeating.

Overview of LoRa™ HAT for Raspberry Pi

LoRa™ HAT for Raspberry Pi: LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

Getting Started with LoRa™ HAT for Raspberry Pi

A consumer can conveniently transfer data in low-power usage using the latest generation LoRa™ spread spectrum modulation technology. With its longer contact gap, lower power consumption, improved protection, and ani-inference method, the E22-900T22S & E22-400T22S SMA antenna connector LoRa™ HAT sets itself apart from standard LoRa™. LoRa™ USB-UART connectivity allows direct communication with a desktop/laptop.

Image Credit - SB Components

LoRa™ HAT 915MHz | 868MHz | 433MHz Features

Communication range up-to 5KM
Supports auto repeating to transmit longer
Low Power Consumption
For Evaluating signal quality with the RSSI or "Received Signal Strength Indicator"
Wireless parameter configuration support
Fixed-point transmission support
SMA and IPEX Antenna Connector
USB to LoRa™ and Pi to LoRa™ Communication via UART
Comes with development resources and manual

LED Indicators :

RXD/TXD: UART RX/TX Indicator
AUX: Auxiliary Indicator
PWR: Power Indicator

Serial/USB selection Jumpers

A:USB TO UART to control the LoRa™ module through USB
B: control the LoRa™ module through Raspberry Pi Pico

Data/Command mode selection jumpers:

Short M0, short M1: transmission mode
Short M0, open M1: configuration mode
Open M0, short M1: WOR mode
Open M0, open M1: deep sleep mode

LoRa™ HAT 915MHz | 868MHz | 433MHz Specifications

Frequency: 915MHz | 868MHz | 433MHz
Power: 22dBm
Distance: Up to 5KM
Interface: UART Communication
Serial Port Module: E22-900T22S | E22-400T22S
Voltage Level Translator: 74HC125V

What is a LoRa™ Gateway, and how does it work?

A LoRa™ Gateway is a piece of LoRaWAN Network hardware thatis set up to accept packets from LoRa Nodes and bridge them to a LoRaWANnetwork like The Things Network. This will normally accept data from hundredsof nodes at once and have LoRaWAN coverage for your devices as well as thosewithin range. On a home network, this is somewhat similar to a Wi-Fi Router.

What is The Things Network, and how does it work?

The Internet of Things (IoT) Is a quickly expanding LoRaWANprovider that is continually expanding coverage in the UK and across the world.The advantage of having a public network is that devices built in one part ofthe UK can operate throughout every part of the UK or even the EU as long asyou're within coverage!

You will create your own portal for you and others to use(such as IoT LoRa™HAT) and maximize coverage at the same time. The ThingsNetwork has a commercial strategy as well as a community plan that is free touse.

Visit LoRa HAT 915MHz | 868MHz | 433MHz Page

Posts You May like:

kamaluddin khan

94 projects • 62 followers

Tech Writer | Maker of Random Contraptions | Education | Learning — #Robotics #RaspberryPi #DIYElectronics

Thanks to Kamaluddin Khan.

LoRa HAT is Finally Out! Supports 915MHz | 868MHz | 433MHz