The Portable Fluid Management Device is a designed to dispense precise quantities of liquid with minimal manual intervention.
Detect visual anomalies and explain them in natural language using a locally running Language Model on the Arduino UNO Q.
An ultra-low-power edge monitor that uses the nRF54LM20’s Axon NPU and acoustic AI to detect industrial pump cavitation and bearing wear wee
AlgaeSense uses AI & microscope camera to see algae cells and control its environmental parameters for growth and harvesting.
Open-source tool that lets an AI model use a real iPhone through a $7 ESP32 board. No jailbreak.
An IoT-based Smart Attendance Management System powered by an ESP32 Development Board, an RC522 RFID Module, and a Buzzer for audio-visual.
An autonomous titanium capsule utilizing ESP32 for deep-sea data recovery and emergency telemetry.
A small low power node that clamps onto an existing water pipe, listens to its vibration, and uses a tiny ML model on the nRF54LM20 to flag
An Arduino controls the lathe's DC motor, counts the number of spindle turns —in either direction— to stop the rotation with precision.
In this project, we built a Smart Egg Incubator using the MakerBuddy IoT Kit, a DHT11 temperature sensor, a relay module, and a 5V bulb.
Setting it up where youtube comments are automatically processed to take user feedback and make code changes with AI.
This project aims to control a (home made) rotator or even a PAN-TILT head (for CCTV camera) equipped with stepper motors, with an Arduino.
Can you store an entire music file on a piece of paper forever? Let's find out!
I built a fully autonomous robot without using a single onboard sensor. Instead of ultrasonic sensors, encoders, or IMUs.
Autonomous robot that maps, measures, and documents residential properties, delivering accurate survey data faster and safer.
Build a desk-sized robot that detects a human face using on-device ML and steers toward it in real time, all running on the Arduino UNO Q
Turn natural language into robotic actions. Build Claude-powered skills to control the 4-axis robot arm myPalletizer 260 M5.
The CH341 IC is mainly used as memory programmer for BIOS. But the CH341 family of ICs supports lots of protocol which are very easy to use!
1D barcode UPC, EAN, CODABAR, CODE25, CODE39 can be easily generated using GW-BASIC and QBASIC using DOSBox or using QB64 under WINDOWS 11
DFRobot M0601 Hub Motor For AGV Interfacing RS485
This project demonstrates a Smart Automatic Street Light System using Arduino and an LDR
BMP180 I2C sensor integration with KR260 using MicroBlaze V with Vitis/VIVADO 2025.1 tool for temperature/pressure & altitude information.
Automatically turn on a console button when starting up my car
Sub-₹500 optical spectrometer using a pulsed RGB matrix and an Arduino Pro Mini to analyze standalone fluid purity completely offline.
