Portable, Bluetooth, voice-controlled claw device for drone! Easy to build, cheap, and made out of recycled materials!
A low-cost DIY programming adapter.
hRobot is an open source, connected, 3D-printable robotic arm, powered by ROS, with 500g lift capacity.
Build you own Robot arm to grab objects with just 3 servos and one Arduino UNO!
A breadboard-friendly STM32F0 development board with added USB2Serial, RGB LED, 7ch hi-sink driver and a simple one-button boot mode.
Hand solderable RP2040 for smaller DIY designs.
This project walks through how to create a fixed hardware design (fixed platform) for the Zynq-7000 SoC in Vivado 2024.1.
This project walks through how to create an embedded Linux image for the ARM-core in the Zynq-7000 using PetaLinux 2024.1
Using XADC on ZYBO Z7-20 to digitize function generator signals, transfer via DMA, and plotting in MATLAB.
A simple display driver for 7 Segment LED displays of any arbitary number of digits, controlled directly using GPIOs. programmed in Ada.
ESP32 microprocessor, L293D H-bridge for controlling 4 servos SG90 and 4 motors controlled via a Html webpage using WebSocket.
TM4C123GXL LED Color change sequential algorithm
This project walks through how to create a base Linux image for the TE0802 Zynq UltraScale+ MPSoC development board.
Learn how to build, deploy and debug with the new. NET Core IoT libraries open source project.
IBDAP's objective is to become an affordable open source & open hardware CMSIS-DAP JTAG/SWD debug probe implemented using gcc & makefile.
The ARA (Arduino Robotic Arm) is an initial project, a first phase, of one of the most popular project carried out by the Arduino community.
This project walks through the steps of how I designed my own custom carrier board for the AMD Kria™ K24 SOM.
Enable the digital I/O available on the Arduino shield header of the MiniZed.
This is the famous MeArm robot arm, but now powered by the mighty CHIP!
Facilitation of quick and efficient cough-based pre-screening for COVID-19 suspects.
A cool experiment to compare the results of Assembly code programmed by Human vs. Assembly generated by the ARM compiler
Learn the complexity of ARM microcontrollers using portable and low cost hardware.
I am working on a anti collision device using Lidar technology and stm32.Shoot me a text if anyone interested.
FlyingROS is a set of tools and libraries helping you to make autonomous flight with your multicopter.
