This guide walks through how to build a custom HDL design into the AMD EDF Yocto project for the Kria KV260 Vision AI Starter Kit.
How an autonomous gemini-4-argon Hardware-in-the-Loop (HIL) agent wrote a kernel on Cortex-M33F that outperforms official ARM CMSIS-NN s4.
Flight Control, Vision and Video: A drone's flight controller and companion computer on one tiny ZynqUS+
Building a Ubuntu LTS configuration for the UDOO Quad
This tutorial walks through an application that reads/writes data to DDR memory from the Linux userspace on the Zynq-based Arty Z7 FPGA.
Let's develop step by step a project for controlling and programming a robotic arm, simulating the basic functions of an industrial robot.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
Bring up a base hardware design in Vivado and Vitis on the Eclypse Z7 with PMOD and ZMOD support.
Running FreeRTOS kernel on STM32F103C8T6 aka "Blue Pill" with the help of Keil uVision IDE from ARM Keil.
Experiences and benchmarks with SATA drives on the UDOO.
solid plastic servo operated robot gripper.
Detect spoiled products using the Tiny Machine Learning approach.
See how to generate a custom embedded Linux image for the Arty Z7 using PetaLinux 2020.2.
This tutorial will show how to add your own custom IP to SDSoC system and have it integrated with PetaLinux.
Using TFT LCD Display 2.8" with STM32 through SPI communication.
Tiny Wireless IMUz (motion sensor)
How to build a Linux for a custom board with AMD MPSoC FPGA using the Yocto flow.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
Want to learn about DMA and Linux Drivers? Create your own Linux Kernel Module to transfer data between PS and PL using this learning guide.
How to build a device for estimating blood alcohol content from a breath sample. Developed with Zerynth and an ARM board.
Take full advantage of Xilinx's Zynq FPGA chip by running both of its dual ARM cores simultaneously.
1000 of K82 Freedom Boards are collecting dust because of the hobbyist unfriendly IDE; pump up the duds with easy Arduino-like functions.
This project walks through how to create a basic Hello World project for the Zynq-based Arty Z7 in the new Vitis Unified IDE.
The Cortex-M1 is ideal for implementations in low-cost FPGA Spartan 7 devices. Let's look at an example project.
