Wake a computer, from outside your network using your phone
A personal, portable, wireless weather system for the iPhone.
A device made with a bar graph and a Particle Photon to show the WiFi strength.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
This project allows the easy programming of the widely used ESP-12 module and its smaller brother the ESP-03 module.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
A fully immersive simulator in which a team of you and your friends can play Cooperative Simulators Such as Artemis, Quintet etc.
By adding a C.H.I.P., an amp, and a hard drive, I've put my entire music library inside a pair of handsome old speakers I control over WiFi.
Project XandR is an Arduino base multi tool that utilize ESP32(ESP32S2 and ESP32) microcontroller.
Use almost any board supported by nanoFramework to connect to the internet with the popular ESP8266 serial WiFi module.
In this project, it is aimed to provide network credentials to the IoT devices for initial configuration via mobile phone flashlight.
Use MicroPython on the Arm-based Raspberry Pi Pico W with a Pimoroni Grow Kit and Twilio to create a plant that texts you!
Best in class Arduino CC3000 controller. Read & write digital pins. Read & write PWM pins. Control SERVO motors. Read analog pins.
Deauther Kick devices off WiFi networks Evil Twin/Rogue AP Fake WiFi network to steal credentials ble remote send hid command's
Device for measuring temperature in server rooms
DIY Thermal Camera: Build your Own Infrared Imaging Device with ESP32 and MLX90640 Sensor
A quick tutorial from our workshop at CascadiaJS 2015!
One of the best modes of Omega Onion is the AP Mode because it extends WiFi to places where the signal is not good.
A system to monitor and display the sensor data and weather forecasts.
Front desk staff at the Drop Zone (DZ) may get too busy to make load calls every 5 minutes. Never miss a load again with this auto reminder.
WiCard is an over the air programmable Wi-Fi module with virtual control panel. Features: GPIO, PCInt, ADC, Timer, PWM, SSM, OTA update...
Banana PI BPI-M2+ is an quad core version of Banana Pi.It support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm
Build a WiFi positioning system with Skyhook and STMicro.
The Mini UPS for WiFi Router is a compact, low-cost tool that keeps your router powered during outages.
