This project monitors the Temperature, and distance. The LED is an indictor that the robot stop at a distance 10cm or less.
Buzzer beeper based on 2 x 555 timers with NTC thermistor high temperature alarm and recordable audio file
Another simulation of a complete oven temperature control with the help of a Vishay thermistor
Log temperature & humidity 24/7 and get daily CSV reports via email automatically. Built with visual blocks - no coding required.
Placed on the desktop, in addition to monitoring environmental temperature and humidity, it can also detect altitude and air pressure
Temperature detector
Mercury thermometers are lame, use a Photon Particle 2 instead.
A project to detect rise in temperature by LM35 sensor(temperature sensor) using BOLT WIFI MODULE through message alert.
A LT spice simulation of a classical 50 W heater thermostat with Vishay thermistor and thermal circuit
Monitor real-time temperature and humidity using DHT22, ESP32, and MySQL with a smart IoT dashboard. Simple IoT project by Yarana IoT Guru
A spice model is provided for a NTC thermistor in the spice software QSPICE and a transient simulation is performed
This project monitors temperature, humidity, and particulate matter concentrations in an industrial print room setting.
Smart Room for measurement of temperature and humidity.
SUCCESS comes to those who have the WILLPOWER to win over their SNOOZE BUTTONS.
Read out SCD4x and SHT4x data over I2C and send it to Sensirion's MyAmbience app. This project is done with the Zephyr RTOS.
M5Stack Project School
How to use temperature sensor with Arduino Uno
Fun-with-fans is the individual project of the IoT course of the master's degree in Engineering in Computer Science.
Measuring both temperature and sound levels in automobiles using sensors to improve the driving experience.
Sensors will check to see if you have left the lights on and if the temperature is where you want it when you leave the house.
How many hours do you spend sitting down at your desk crunched over a computer? If it is most of your day, then I have a device for you!
This project explores temperature compensation and calibration for devices such as sensors, thermometers, and more.
This unit captures Humidity, Temperature, CO2 (ppm), and TVOC (ppb) and sends that data to an Adafruit dashboard.
Learn how to build a smart weather device using the Raspberry Pi 4 Model, utilizing ThingsBoard for real-time data.
