He is welcome back again this time we are making a fire fighting robot also we have made a firefighting robot earlier but this time we did
Detects the temperature and and shows it on seven-segment display
Contactless temperature measure with arduino and Blynk. io
3-Wires/4-Wires FAN Control and Over Temperature Protection using LM35 and ATTiny13
Thermometer up to 1000 ° C with Max6675 on the ESP8266, ESP32 or Raspi Pico
Based on the time of day and temperature of my room, my fan will change speed to meet my desired comfortable temperature.
A new way to monitor a speaker during extended break-in use. Notifies the owner if the woofer exhibits negative characteristics.
A project to bring convenience and to enhance the users' experience in a retail store.
This is a sensor combination that can let you know when the temperature, humidity, or light in a greenhouse is too high or too low.
Simple How-to guide for using MAX6675 Temp sensor using an XIAO MCU
A huge temperature drop will be there after installing this cooler and overclocking performance of pi4 is working with full efficiency
This fire detection prototype measures room temperature and color and sends an audible alarm in the event of a fire.
Stopping my humidifier from working by drowning it via servo when it is no longer dark or when I want.
A low-cost ESP32 IoT system that monitors poultry water temperature in real time on a 20,000-bird farm, sending alerts and reducing producti
This project is a monitoring system for your car that checks the temperature, carbon monoxide levels, and movement inside the car.
Helps everyone keep track of some basic responsibilities in an apartment. Keeping track of the little things makes everyone's life easier!
The Oven Safety Detector will help monitor the basic oven components that indicate if the oven has been left on and notify the owner.
This device measures the rotational speed of fans and records the difference of temperatures due to variating speeds said fans.
Temperature and Humidity Room Control
That is coding
A simulation in Qspice of PWM temperature control of a thermolectric Peltier element with NTC as temperature sensor
Extracting Humidity, pressure, and temperature sensor data, generated by BME280 controlled by the master Micro RP2040 board.
Air QUAlity COntrol it is a project based on Thingy:53 and other sensors + hardware to monitor and COntrol the air quality in a given place.
Electronics and programming to solve dehydration
