It monitors the temperature under the sink of the guest bathroom, turns a heater on and sends a message if the temperature gets too low.
ESP8266 Weather Station displaying temperature, humidity, pressure & dust on an OLED display with a touch button.
A temperature-based fire alarm based on the Bolt IoT platform. Detects a rise in temperature and sends SMS alerts.
Professional, open-source and highly accurate air quality monitor built measuring PM2.5, CO2, Temperature and Humidity.
Takes care of your plant when you can't! System monitors temperature, humidity, and more while making sure the plant stays watered.
Clothes dryers waste heat by venting it to the outside world. Reclaim that heat after the humidity of the air has dropped to safe levels.
This video shows how to capture readings from the LM35 sensor and display them in the form of chart with the slight help from chatGPT
Follow the below steps to make a fire detecting alarm.
LM35 sensor with ATmega328 and OLED for stable, real-time temperature monitoring, suitable for education and environmental applications.
Controls led and buzzer via cloud (bolt app) and manually (button).
Two Photons are recording temperature in different areas and the main Photon will display the average temperature.
Learn to use a Temperature Sensor with your Arduino to trigger actions on your device or robotics projects
Monitoring the humidity and temperature of the given surrounding.
Allows you to see your cooler temperature at all times, and if it gets above a certain temperature, an alert will be sent to your phone.
Using LM35 sensor and Bolt WiFi module, we can build a monitor that sends SMS/email whenever it detects an anomaly.
Ever overslept and never got the chance to inform your boss about being late? With this project you can do exactly this!
This tutorial shows how to build weather station from Magicbit using Arduino which can get details from your smart phone
In his project I have done the prediction of my Room temperature using Polynomial ML prediction algorithm and in hardware, Bolt iot is used
This project measures temperature with a 1-Wire sensor each minute. If the measured value is out of range, it activates a pin.
This project demos the Stratify app.
In this blog, we'll delve into the working and construction of an automatic fan controller that utilizes the UA741 IC.
BrewTemp controls your fermentation chamber heating and/or cooling it, using IoT platform (Ubidots) to recolect data and control setup.
Our team created a circuit that measures the temperature of a refrigerator to make sure your food stays crisp and cold.
In this tutorial, we're going through the initial steps to get setup with NB-IoT and the Quectel BC95-G and publish an Event to Wia.
