An IoT based smart system, which will monitor and predict temperature of human body and create an alarm if any discrepancy is noticed.
Turn your Atom Lite into a smart weather station and check real-time data on your phone. Simple, cheap, and powerful!
This is a simple weather station that can measure PM 1.0, PM 2.5, PM 10.0, CO2, TVOC, humidity, pressure, and temperature.
The project shows how HDC1008 temperature and humidity sensor could be used on Windows IoT and integrated with Azure EventHub.
Use a NodeMCU Amica (ESP8266) and a Funduino moisture sensor to build a Wia Flow that notifies you when your plant needs watering!
In this tutorial we will use I2C BMP280 pressure, temperature sensor, OLED lcd, Arduino UNO measure pressure and temperature and display res
DHT11 Temp and Humidity library from scratch to send data to ThinkSpeak with an AZDelivery ESP8266 ESP-12F NodeMCU Lua Amica V2
I have received a lot of requests for OneWire Maxim DS1820/DS18S20 thermometer tutorial, so here is the first such project.
In this project will guide you to build an ML Cluster Based Cold Storage Monitoring System with Cellular connectivity.
This ESP32 based use of automatic watering can help take care of plants.
Have you ever wondered about building an Arduino weather station on your own? Well, this might be your chance to build a basic one!
This is a "Smart Heater." Control the heater remotely, see historical stats.
A Simple yet handy scrolling temperature Display
Create data for temperature by utilizing IoT and Platfrom thinger. io
Use the Arduino-HomeDing low-code library for ESP8266 to build and configure a sensor device with DHT22 or other environment sensors.
Here is a new project about how to build a smart mirror and how to create a plugin for your device from Sigfox backend.
Take a dumb air conditioner and make it smart so that you can set it and forget it. Uses Particle Photon.
Use two 915MHz radios to send/receive current environmental information and display it in real-time up to 350 meters away!
DHT12 complete library (DHT clone), I2C and one wire connection and the connection schema of Arduino UNO and ESP8266.
In this tutorial we will learn how to use DHT21 Humidity and Temperature Sensor with Arduino and display the values on the OLED Display.
A photon that measures the temperature and humididty with a DHT 22 sensor and communicates the temperature data to another photon.
Make a fan turn on when it reaches a certain temperature.
In this CSV Data Logger guide on Raspberry Pi Pico, we captures the temperature readings from an onboard sensor and write into CSV file
Create your own shake controlled weather station with the help of this tutorial in under 5 minutes!
