An engineering school project.
Smart plant care system that measures and graphs, the temperature, humidity, soil moisture levels, heat index, and more.
Teaching physical computing: Mini weather station with Raspberry Pi 3 and Sense HAT, programmed with Scratch and Python.
In this electronic project, I am going to show you how to make a simple fire alarm circuit using lm358 ic
Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.
Stable climate in greenhouse: Temperature controlled windows of greenhouse and monitoring of humidity, light, rain and temperature.
This device can remind user to drink water after a set time interval and can remind users when the water is at a right temperature for drink
This is project with the arduino i2c module tmp102 for measuring temperature. The
A heater similar to commercial one and made for low end tasks. Like PVC or plastic cutting or to heat small knifes and cutters.
A Helium-based air quality sensor and solar setup.
By analyzing atmospheric values, this tiny unit can decide when to irrigate your garden if it is necessary.
A fully-featured Linux server with a screen to tell you about the status or any problems.
SensorBoard is a opensource project with GUI.
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
Transmit environmental data from the X-NUCLEO-IKS01A3 expansion shield through the Helium Network and log it in a Google Sheet.
Using M5Stack to water a plant and report soil moisture, humidity and temperature. Supports Home Assistant and its MQTT Discovery.
How to go from theory to a practical working prototype.
New to embedded programming? Use MicroPython to read and display temperature and humidity on an LCD. No soldering or breadboard is needed.
Checks if humidity threshold is reached and informs the user by using Blynk/IFTTT-services with softAP integration.
A GPS and temperature sensor built on the Hologram Dash for asset tracking or outdoor monitoring.
Thermal Cam system is to detect face and measure body temperature and detect higher temperature and alert.
The goal of this tutorial is to enable you to capture and send sensor data to cloud from your NodeMCU device using Arduino IDE.
How well, or how differently, do different sensors measure environmental data? A comparison of two units under different conditions.
This Instruction will show how to make a box which can indicate temperature and humidity with Arduino
