Attractive GUI designs seem quite possible with Raspberry Pi for automation side.
We design a flexible, remote-controlled test system for polar codes in FPGA.
M5Stack and Micro:bit can control each other, thanks to the M5:Bit
This project implements a UART transmit logic design in HLS.
A pocket-sized debugger for monitoring serial data.
One of the many ways to tinker with your board!
A Guide to Installing MicroPython Modbus Library on Raspberry Pi Pico W using Thonny
We wanted to increase the communication range of the Tactigon Skin so we could use it over longer distances than BLE can offer.
Ever got stuck on that super difficult hidden maze puzzle? Fear no more and build yourself an automatic mapping device!
AT Workshop - Walk through communicating with cellular modems through UART with CircuitPython.
Sometimes you need a simple dashboard to show your data in a nicer way than just numbers and for sure you have a smartphone or a tablet...
NAS allows you to save files from your computer and mobile devices to external hard drives via your home or office wireless network.
This project uses a serial 40x4 LCD display with a Teensy board to help a compact serial terminal receiver to be connected to many systems.
I will further extended my last project on serial communication by writing a program that controls the built-in LED on the Arduino Uno.
The project shows how to design using the same USB to enumerate as two COM PORT Terminal.
This project focuses on how to write embedded C applications for the ZynqberryZero using Vitis.
This project shows you how to tune the parameters and monitor the signals of an algorithm running on LEGO MINDSTORMS using Simulink.
How do you get a notification when your home has lost power, or lost its internet connection? Enter Particle Electron!
Wouldn’t it be cool to build an Arduino Speed Measuring Device simply and learn from it?
The Firmata Protocol is a popular Arduino focused library used by many popular boards. Now you can add yours!
This is a quick guide to connecting a RPi to the Hovergames drone, and communicating via mavsdk-python
How to Read Holding Register Values of Modbus Slave Device in Raspberry Pi Pico W with TTL to RS485 Converter using MicroPython
I made an audio amplifier using a simple op-amp circuit that will be read using the STM-32 Nucleo.
The project gives a short description on how to design a USB design which would enumerate as an HID, COM PORT and audio devices.
