Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
How to control an old RC Car using Arduino, an Arduino USB Host Shield and an XBOX360 wireless controller.
RC light controller for driving 5 banks of 4 ws2812 led lights, using throttle, sterring, and chanel3 of an RC car.
This code reads PPM signal from RC receiver by making use of interrupt pin.
Ever wanted to make an anything RC on a budget? This tutorial walks you through how to make a simple, low cost RC controller with Arduino.
Arduino Nano bike bag signals, controlled by a wireless (RF) RC attached to front handle.
433MHz IoT Smart Home integration to control compatible RC power sockets, LED-lights and more. Usable with every MQTT compatible smart home.
This project is very simple car with Nodemcu esp8266 that you can make a car control it over WIFI and gain more experience have fun
Just how powerful is that plane?
BigTrak reborn, driving it outdoor!
This project will show you how to make an Arduino submarine.
In this tutorial, I will show you how I build an Arduino based RC Airplane.
A simple GPS speed tracker for RC planes, drones, cars, etc.
Inspired by a couple project a couple people have done already
A joystick/gesture maze ball game with wireless control.
This project is an ocean, deep and wide of learning.... 3D-printed robotics, ESP8266 IoT, Arduino code, and designing on a dime.
Using the sensors and controller of a drone, I created a rover to use the drone's stability features on the ground.
An RC rover with GPS tracker, controlled by an Android application, made leveraging the ARTe Arduino real-time extension
Turn your RC transmitter into a generic Bluetooth LE Gamepad and run your favorite RC simulator wirelessly!
Arduino RC car, using a joystick shield and NRF24l01 modules.
Arduino software for Cyclops goggles that adds functions such as Low Band support, OSD, bandscanner and low battery warning.
I used the Primus X flight controller board to manoeuvre an extremely agile hover-craft frame I designed.
OpenCV hand tracking to control the flight of a quadcopter via a TLV5610 DAC and MSP430 translation.
In this project, I layout how to set up the hardware and software necessary to create a RC boat and a corresponding wireless remote control.
