This is a project to take deep focus images of fern gametophytes, using a modified flatbed scanner as a rail.
A development kit to program and run a ESP-01 WiFi board.
The goal for this project is to control the position of a ball on a beam that is actuated by a motor while using 5 LED lights as indicator.
Programming ESP8685 modules can be tricky due to specialised position of the debug pins. This project creates a simple jig for this.
Stem:Bit- A programmable block kit for micro:bit
This development kit allows programming and development of systems based on the ESP-12 module or its smaller brother the ESP-03 module
Just from pure passion to see how low-end PIC exercises AVR, I made this programmer.
TI-RTOS, operating system for the Texas Instrumets microprocessors. Application of the LRM (Long Range Mode) on the RC-CC1310-868 device.
This is an amazing approach to program these small power microcontroller without spending a lot of money on development shields.
A simple game for the Calliope Mini that creates a random math task and lets the user solve it.
Follow these instructions to learn about the different modes of TIMER operation on an STM32 microcontroller using simulation in Proteus
A arduino programmed score counter using two buttons, a potentiometer that regulates the maximum score and an LCD for display information
This is a driver with user-friendly functions that provides interface between the Pixy2 and the MSP432P401R microcontroller.
This project is about how to set up and configure our photo trap.
A simple and easy 'wire loop" game using Calliope Mini with easily found things at home!
The CP2102N is a universal USB to UART converter which helps to convert the USB data into TTL serial form for microcontroller interfacing.
A cross-platform serial monitor and plotter in one. Inspired by the Arduino IDE, but with more features.
In this blog we'll learn to creating barcode using python, here we'll be learning creating barcode in 3 different ways:
Here you get your own very small AVR programmer board that you can put in your keychain.
An ATmega328-powered programmer for 28C64 EEPROM.
A crowdfunding campaign for the LapPi 2.0, a build-it-yourself laptop kit based on the Raspberry Pi 4.0, was hinted at a few months ago
The solar panels generate the most electricity when the incoming light is perpendicular to them. A solar tracker rotates the panel along one
Programmer for PIC microcontrollers
In this tutorial we are going to Update the ESP32 board using the over-the-air (OTA) process.
