In this tutorial we are going to Update the ESP32 board using the over-the-air (OTA) process.
The well known USBasp programmer, with PCB redesigned to fit better on a breadboard, switches instead of jumpers, and an Arduino ISP header.
This is a guide to the testing and operation of my focus stacking mechanism.
Spresense is powerful, but it is also pricey. I'm planning a project that uses much cheaper and smaller Arduino all without FTDI.
I worked hard on making an automated Bag Valve Mask Pump. This is essentially a VENTILATOR. If we can get a doctor to help we can SAVE LIVES
A review of the Seeeduino v4.2 from Seeed Studio.
Thanks to a device that can read the attention of your mind, we send through bluetooth this value. The robot moves with more or less speed.
You can create a hardware notifier that lifts UP a paper astronaut to alert you each time the International Space Station passes over you.
A simple and zero cost way to add JTAG, I2C expansion, and UART to your hardware.
Using this programmer any Serial communicating device can be programmed. I made this for my minimal Arduino nano board (Atmega328)
Our ongoing robotics workshop making learning accessible to all.
Simplest portable altitude meter you could ever make.
Family mruby is a stand-alone Ruby development environment based on an original PCB and FabGL.
This project is the programmer board which is an AVR high voltage programmer (parallel programmer) and a USBtoSerial interface...
A compact STLINK-V3 adapter converting STDC14 (1.25mm) to 2.54mm headers, with USB & LiPo power options for flexible debugging
We can still use the PIC K150 programmer for baseline ICs from microchip. The programmer still works with WINDOWS 11 using few changes!
This programming technique will save you money, no need for programming electronic parts so just follow the provided steps
A practical tutorial that shows how to add assembly language code to your Arduino sketches.
No more messy wires! Looking for an easy way to program ATtiny85 & ATtiny13A microcontroller
A device used to measure temperature over a period of time and predict the temperature after certain period of time.
Is the part 3 in the getting started with PIC series, I am here with a programming tutorial, without using a PIC KIT.
Smart nurses diagnose lung diseases and suggest medications through patient health indicators
I made this Arduino to make it compatible with all the sensors, modules and screen. With dual headers a lot of jumpers connected easily.
This tutorial series teaches you about the Arduino hardware and software and how to use it to construct a range of electronic projects
