Program the MATRIX Voice's ESP32 with Visual Studio Code using PlatformIO, an open source ecosystem for IoT development.
Program an AVR-IoT WG board externally instead of the onboard debugger. I had to workaround as I bricked my nEDBG debugger on my AVR-IoT WG.
I made this really amazing PCB for INTEL 8051 microcontroller in the form factor of an Arduino UNO. See how to build your own one.
A programmer designed for easy programming of ATtiny13, ATtinyx5 series ATtinyx4 series, ATtiny2313, ATmega8 series, ATmega328, ATmega8515
Easily program any ATtiny microcontroller using a DIY Arduino Uno shield.
Raspberry Pi Zero 2 W runs at a default speed of 1GHz. It's possible to increase the speed to 1.2GHz or even 1.4GHz.
Teach AI in the real world. The Hiwonder SO-ARM101 is an open-source robotic arm from the Hugging Face community that learns tasks by imitat
The mechanism of the project depends on the motion of many wires connected with each other...
This project introduces a functional extruder at a reasonable price, which can be affordable to the fablab community and others.
AVR-HV2 is an Arduino-based high voltage parallel programmer for AVR microcontrollers.
Using the $2 (Blue Pill) STM32 board we can have a debugger that supports breakpoints. No need of OpenOCD, as it runs GDB on-chip.
Are you tired of connecting programmer every time you want to change some functionality of your robot? Why not to try wireless programming?
In this article, you will learn how to make an obstacle avoiding robot using an Arduino UNO board.
I must test the problem on my freezer (:-P) and I don't want to rewrite a sketch. The solution is to use a Bluetooth module!
“Plug and Play LoRaTM Dongle” based on Raspberry Pi RP2040 and LoRaTM Modules
Create your multitasking robot! This project demonstrates the rich capabilities of the micro:bit board for the robotic car development.
Build an actual Arduino using your breadboard! Yes, this Arduino actually works!
The most used programmer in Arduino and other compatible boards. Let's have a closer look on circuitry and more.
Building and running a parallel code in C++17, implemented using Khronos CL/SYCL-model specification, on Raspberry Pi IoT boards.
DIY board that simplify the flash write for the ESP-01 module of ESP8266.
This is a project to make a focus stacking rail from a piece cut out of an old microscope.
Small USB to Serial programmer module, with Type C port and having compatibility with Arduino micro-controller.
Build an amazing weather station that uses ESP32 programmed in Python with Zerynth and Ubidots IoT platform.
Learn how to install Raspberry Pi OS and .NET 10 on Raspberry Pi
