Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
It can be used to improves sleep, mental focus, and the body’s overall performance by helping the energy output and regeneration of the body
An automatic pill dispenser aimed to ease the lives of the elderly and disabled persons.
Emergêncy hospital Ventilator project to combat the COVID-19 Healy Crisis. Together we are stronger and together we will win💪 👉🌈.
A portable patient monitor which monitors your health is introduced with the combination of Raspberry Pi and ProtoCentral's Healthy PI Hat.
MAX86150 puts ECG and SPO2 on a single chip, opening new opportunities for calculation of pulse transit time and indirect blood pressure.
Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.
A TinyML based Medical device powered by Edge Impulse to predict Atrial fibrillation, AV Block 1 and Normal ECG with >90%.
Design and build a portable biomedical monitor that allows obtaining a diagnosis in real-time and capable of determining possible diseases.
In this project we show how we made a single-lead ECG monitor for heart-rate variability using the MAX30003 and an Arduino Uno.
This deviceis in every respect superior to the original Plasma Rife machine, mainly thanks to today's level of development of Electronics.
To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.
We aim to bring proper heart care to developing countries. An early detection of these pathologies its vital for an effective treatment.
Simple and inexpensive way to make such a device, if you have basic knowledge of electronics and microcontrollers.
The Pulse Express board makes it simple to get the three vital parameters - SpO2, Heartrate and Blood Pressure trending (BPT).
Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.
Blood pressure measuring and Detailed Report Emailing system using Raspberry Pi.
For its making I will use components that can be easily obtained.
Using Ultra96 and NCS to detect and classify skin cancer.
We interface one of our most popular Arduino shields, the ADS1292R ECG/Respiration shield, to ProtoCentral's new ESP32 platform.
Ever wake up in the morning found your CPAP mask is off? This device will alarm you if you have unintentionally removed mask during sleep.
A simpler version of my previous project "DIY Advanced Plasma Rife Machine" with embedded Carrier signal frequency oscillator.
Me, a non-apple guy, recently bought all the apple devices a man can get. Here is this week's project, an nRF53 version of the apple watch.
