A project that will bring better life for SSHS's guardians!
In this Project We are Control the LED and BUZZER using LDR(light Dependent Resistor) with the help of Bolt Iot Device and Linux server
You will learn how to develop a system to detect when the refrigerator is with few ice cubes.
In this project, I will create a PCB for a WLED driver with USB Power Delivery (PD) support
A 16x16 Red/Green/Blue matrix display driven by shift registers, MOSFETs and a Arduino Pro Micro (old school electronics).
Control the LED status from STM32CubeMonitor
This system detects the temperature around and when the temperature is high, it turns on the AC and when it it is low, it turns off the AC.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Find out how to use the Light Up Board with textiles.
Create a rotating lithophane lamp that when triggered will play music and LED animations
Now with 5 exciting modes of operation: music equaliser, 2-player pong, animator, spirit level and voltage display.
A 3D printed RGB seven segment.
Controls the switching on and off of the light in the room depending upon the room's brightness.
Ambient LED artwork created by playing an animated GIF in extreme slow motion with high LED refresh rate, and interpolation between frames.
So Hey Guys in today's article. I am going to teach you how to make an LED chaser lights.
A simple test of the four-pin RGB LED device with an eye towards further applications.
Learn how to randomly change the LED color and ramp the brightness
In this circuit LDR sensor determines the intensity of light. If the intensity is less, LED will be turned on or else it will be turned off.
Use Serial to Ethernet to make the different solution than old project
This is my simple LED panel. I used 6 LEDs, each with a power of 10W. 3 LEDs are warm and cold 3 LEDs.
The thermometer which has a WIFI connection. All the body temperature readings are persist and retrieve any time.
Code Blue and AVTokyo in Japan get their first hardware soldering village with blinky badges.
Making 7 Segment display from 7 LED's & controlling them with atmeg328p & displaying numbers
Remote switch for workshop power, with indicator, workshop temp monitoring, and automatic shutdown. Graphing through Google Docs.
