An electronic ocean lighting device that responds to IMU motion
Get live Roll/Pitch/Yaw out of a factory-calibrated 6-axis IMU in minutes — no sensor driver coding required.
An open, modular wearable hardware platform for researchers and makers, building flexible sensing and edge AI.
Fully open-source Inertial Measurement Unit (IMU) development board built around the STM32F405 processor, the ICM42688-P IMU sensor.
It's out of this world - 10 Dof, LiPo safety & up to 2A with an ESP32-S3. Lets build some rockets or whatever your creativity can dream of.
Fun robot dog that responds to both different pitch frequencies and a game controller!
Young Padawan, in this post you will discover the ancient art of building your own lightsaber—powered by the PSOC™ 6 AI Kit.
Hey guys, I built a wireless sensor node on the nRF54L15 Sense with Zephyr RTOS that streams audio FFT over BLE to WebUI+ IMU Data via LoRa.
Pocket Beagle powered robot based on the inverted pendulum principle. The two-wheeled robot uses a PID algorithm to keep itself upright.
Voice Band is a Push-to-Talk voice assistant Open Source DevKit. Based on the XIAO nRF52840 Sense. It has a button, a battery, and a case.
A real-world-synced virtual telescope that reveals the stars where you point it, based on your location, time, and orientation.
A game controller built with a real fishing rod and reel for a more immersive fishing game experience.
An STM32-based control platform featuring GPS, 9-axis IMU, actuator control, and open firmware for vehicle and robotics projects.
A Pomodoro robot that cries when work time ends and must be gently rocked with both hands to start a break.
Tilt your M5Stack StopWatch and watch your own photos tumble, roll, and pile up as round "drops" under real gravity. A pocket-sized physics
Open-source Software Defined Vehicle platform. 14 ESP32 modules on CAN bus, Pi edge gateway, cloud, and Android app. 30 MIT repos
What if you could throw a drone in the air and it stays suspended in motion, time to hand it off to handsfree.
Watch a raw gyroscope drift while a Kalman filter stays level, live on a BNO055 and a Raspberry Pi 5 🧭
