DIY Temperature and Humidity Meter with XIAO ESP32C6 and Zigbee Integration for HomeAssistant!!!
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Weather Station With Arduino/Genuino, ESP8266, BMP180, DHT22 and Thingspeak.
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
With Arduino + OLED and LCD
An air quality (particulate matter) and environmental (T/H/P) sensor system built with a Raspberry Pi Zero W, Python & Redis.
Low-cost, 8-station irrigation controller expandable to 64 stations.
ESP8266 Sensor Board powered by a Battery, monitoring Soil Humidity and Temperature. Data are been published at Cayenne MQTT server.
Take multiple AcuRite sensors, capture the data with SDR / MQTT into Node-RED then onto InfluxDB out to a great Grafana dashboard.
Today we will make an automatic air humidifier with Arduino!
Air meter making, a second time! Let's look at temperature and humidity using the DHT 11 module.
This tutorial will take you step-by-step to get your RAK815 module programmed via the Arduino IDE and use the on-board peripherals.
A short, simple Python program to read the SHT31-D and probably other types of sht3x-dis sensors directly into Raspberry Pi (I2C interface).
This experiment will reveal ability measuring of Humid sensor DHT22, SHT21, BME280. Also mention about how to calibrate them
Using Arduino and the sensors I analysed how a small air humidifier can change the parameters of the room and influence health state.
A personal, portable, wireless weather system for the iPhone.
Temperature monitoring using Arduino and SHT85 with High accuracy.
Moisture is a problem for most things in storage. Now you can have confidence that your bin is air tight and desiccant is still working.
An automated humidor using an Arduino — with or without building your own humidor.
The Temperature and humidity data can upload to could via the Wio terminal.
Being aware of the weather conditions around you is easy with a DIY Weather Station using Raspberry Pi.
The ESP8266 Adafruit Huzzah posts data to Adafruit.io over MQTT. Sensors: DHT11 for air temperature and humidity, DS18B20 for water temps.
Ever care about the place you may spend one third of a day? enVMon captures noise level, air quality, UV level, temperature and humidity.
Using an ESP8266 and Si7021 sensor to remotely monitor temperature & humidity via MQTT.
