A stepper motor shakes a limb to frighten away birds and squirrels. It is under the control of the MKR1000.
Installing a Pi Zero outside with several environmental sensors including lux, temp, press all talking to Cayenne via Power over Ethernet.
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
Transmit environmental data from the X-NUCLEO-IKS01A3 expansion shield through the Helium Network and log it in a Google Sheet.
How to make a Forehead gun自製額溫槍
Control your blinds to collect as much sunset light, and eventually closing the blinds for you.
Get temperature and humidity, log them to SD card and send live data to Bluetooth.
Electricity meter reader using Espruino board and framework.
#DonLuc #Environment #Microcontrollers #ESP32 #MQ #GPS #SparkFun #Adafruit #Pololu #Fritzing #Programming #Arduino #Electronics #Consultant
The project combines machine learning with low-power hardware to enable ultra portable devices to understand their surrounding world.
Projects shows how to use Pi-Cubes,Raspberry Pi and Node-RED to control home furnace.
This is a tutorial about using a TFT LCD Touch Screen to make a clock that can show temperature and humidity at the same time.
DHT22 sensor connected to photon transmits humidity & temperature values to spreadsheets on Google Drive.
Build a small device that can track a bike's movements and then display that data on an Avnet IoTConnect dashboard.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
We solve a spark sound recognition task from raw audio data on a SparkFun RedBoard Artemis ATP board. Spark detection on a SparkFun!
It displays time/date, temp in C & F, heat index, dew point, dew/fog, frost warning, humidity, air pressure, delta-t, analog clock and more.
Turn any tabletop surface into a hidden touchpad for your computer
Ceri could provide reliable real-time data to the processor to monitor the drying stage of coffee beans.
The purpose of the article is to create the most detailed assembly instructions how to make your first do-it-yourself radiation detector
LM35 Temperature controlled Fan
This small and attractive device periodically displays an attention-catching animation followed by the current temperature in C° and F°.
Ever been obsessed with monitoring the surrounding air quality?
Arduino how to - using BMP280 (temp & hum sensor) I2C breakout from itbrainpower. net and Arduino 3.3V or 5V shields.
