Our natural waterways are beautiful, provide recreation and support agriculture. We must ensure their health, safety and conservation!
Monitor your campus with SeeeduinoCloud and Microsoft Azure services.
Here we measure rainfall.
Will guide you to build an Outdoor Weather Station with DFRobot FireBeetle 2 ESP32-P4, Five Sensors, and a Live Web Dashboard
Make your raspberry pi text you if it senses an intruder in a set amount of time using a simple PIR sensor and internet connection!
Tool that leverages environmental capabilities from the RPI Sense hat in addition to a GPS module and microphone.
Monitor a dumpster's status with flame, movement, and fill level sensors connected to a MKR NB 1500.
The Cortex-M1 is ideal for implementations in low-cost FPGA Spartan 7 devices. Let's look at an example project.
A completely autonomous way to monitor a location's temperature and humidity, whether a light is on, and if motion was detected.
How to control water temperature using arduino and water heater element like PID controller
The Soil Moisture Sensor uses capacitance to measure dielectric permittivity of the surrounding medium.
Utilizing the power of Azure IoT Suite to monitor the health of our local stream as we work towards reintroducing salmon.
This project will demonstrate the real prototype of smart cities product including sensor data manipulation using Google Data Studio.
With this system we are able to determine the presence of toxic gas in our environment. Remotely determine the gas level is also possible.
Take multiple AcuRite sensors, capture the data with SDR / MQTT into Node-RED then onto InfluxDB out to a great Grafana dashboard.
Senses and displays temperature and humidity, and controls power to fans, heaters, etc. based on flexible temperature trip points.
Basic Interface Of Lora With Arduino
Reconfigurable structures that enhance occupants' social and physical experiences.
Ever wondered if you could build a device to scare your friends? Well here you have transform your room into a haunted house.
This sample project shows how to build a LoRa connected UV sensor(I2C)
Using an ESP8266 Thing Dev, write the current light levels to a local webpage.
My idea is to design and Implement a simple Remote Home Climate Monitoring Station used in machine learning using Edge Impulse.
Logging telemetry from IoT sensors is a saturated rites of passage exercise after the obligatory Hello World exercise is complete.
A sensor node that publishes Temperature, Ambient Light, Humidity, Atmospheric Pressure to the cloud and does not need battery replacement.
