You want to run MicroPython on a PSoC™ controller? Here's how you install and program a PSoC6 Wi-Fi BT Prototyping Kit with MicroPython.
This project generates and tests a Linux-based hardware platform for Ultra96v2 using the Xilinx Vitis 2020.1.
A device that reads a bar code placed on the tube and, based on it, moving two step motors to place the tube in the correct position.
How I created a $10 ESP8266 GPS Tracker that uses Open Wi-Fi networks & DNS exfiltration for communication.
This project utilizes Can Bus to read sensor values and communicate over serial to the display featuring customizable GUI.
Exploring Hand-Controlled Tele-Operation of a Robotic Arm on the Tria Vision AI-KIT 6490
In this tutorial, we will use machine learning to build a gesture recognition system that runs on a tiny microcontroller, the RP2040.
The main objective of this project is to develop a smart home automation system with a button key fob transmitter by using RF.
Giving the STM32 Blue Pill a facelift
Avnet provides pre-verified designs for its platforms. This project describes how to re-generate the ZUBoard designs from source.
ESP32DIV is a dual-purpose wireless testing toolkit powered by an ESP32
Looking at the different micros from STM and comparing them to each other along with an Arduino UNO, converting an STM32 board to an Arduino
See how to generate a custom embedded Linux image for the Arty Z7 using PetaLinux 2020.2.
In This Tutorial, i'm going to show you how to control a servo motor with the H-Bridge Motor Driver
Built a straightforward ESP32 S3 CAM Module-based device that takes pictures similarly to a point-and-shoot camera.
Using some external software we an easily get the code back from Arduino, but this time the code is in the form of HEX file
Social Distancing Device for Covid-19
Read GPS data from thingspeak and show it in the Google map using ESP12e Nodemcu and GPS Neo 6M Module tutorial
Develop, compile and flash Particle Photon's sketch over the cloud using Visual Studio 2015 with IntelliSense.
Differential drive robot using ROS2, micro-ROS and ESP32
IoT prototyping with our Pi Hub: 20+ sensors, modular design, Raspberry Pi-ready. Learn, create, innovate - all in one development kit.
Upload files to SPIFFS and web OTA firmware update option under Arduino IDE version 2.0. To solve the problem, I made the following sketch.
Application notes for Pmod CMPS2 and Arduino Uno. The 3 components of the magnetic field, module, & angle are displayed in serial monitor
Automatically shutdown valves when water pressure drops and turn them back on when pressure is restored, monitor for burst pipes etc.
