Monitoring the CO2 levels in classrooms
Simple portable USB scale to be used as a kitchen or industrial scale, supported with PC software for setting and showing weight readings.
How do you use Multi Channel DMA to send data from the PS (running Ubuntu) to the PL?
Care for elderly people, remind their medication, doctor appointment, and heart tests. Notify caregivers when something goes wrong.
The main aim of this project is to implement a voiting system by interfacing with LCD and keypad(4x4 matix).
Drive and control two DC motors with an STM32 and the L298N H-Bridge using PWM for precise speed and direction management.
An autonomous UV Robot capable of traversing a room and disinfecting it.
1btn is open source wifi connected device uses the internet to complete a task with the simple, satisfying click of a button.
An open-source FIDO2 security key built on STM32L432KC, featuring AES-256 encryption and a custom C# SDK for secure authentication.
Before energy meters, one of my first hobbies was creating smart switches to automate my room.
The main objective of this project is to show how to interface a uCAM-II serial camera to 4Duino.
A PCB-based magnetorquer offers a compact and lightweight solution for CubeSat attitude control, integrating seamlessly into its structure.
In this project, we will learn how to build an automatic night light circuit using an LDR (Light Dependent Resistor) and a BC547 transistor.
ESP8266-based control for passenger cabine of a stretch limousine.
In this project, we will learn how to make a Bluetooth control boat using Arduino.
I've been using my Raspberry Pi 5 for 5 months, now! A reliable and responsive micro SD card with fast data reads and writes may be superb.
Voltage: 0-3.3V, Frequency: 1Hz-10kHz 3 Sampling Modes: auto, normal and single time 2 Trigger Modes: rising edge and falling edge
Getting Started with Infinite-ISP, the open source image signal processor on Efinix Titanium Ti180 J484 Development kit.
Writing a custom driver for an IP step by step starting from nothing and ending with interrupt handling support in the driver.
Same as an Arduino but smaller
Here in this tutorial we have transmitted data from microcontroller to PC using one of the UART of STM32l100 mcu.
You will learn how to create an odometer and calculate speed, distance traveled and other parameters.
Accelerate trigonometric calculations on hardware by using the classical CORDIC together with DMA
let's build this
