This post details my experience building a plasmatic lighter with the help of the fantastic staffs at PCBGOGO.
Sometimes using sound or voice gives an edge to a project. So in this tutorial I made an Arduino based music player using DFPlayer Mini
In this video I've covered all the installation process of espressif IDE and I've told how to work on example templates.
The BeagleBone will be controlled through the network and use a serial terminal to communicate with off-board devices such as MCU boards.
Applying the y2k22 patch for HLS in my system took a few extra steps outlined in this post.
Application notes for Pmod ACL2 and Arduino Uno. The 3 components (X, Y, Z) of the acceleration are displayed in the serial monitor.
Application notes for Pmod HB5, Pmod BTN and Arduino Uno. In this app, pushbuttons will be used to control a motor.
Interfacing a 16x2 LCD using a MCP23017 16-bit input/output port expander IC with Raspberry Pi via I2C interface.
Here's a quick Node-Red demo using a potentiometer, MQTT, and MSP432 LaunchPad!
This Arduino based project is an LPG gas leak detector and alarm built using MQ6 gas leakage sensor and using a servo to open an outlet.
A small microphone amplifier circuit using operational amplifier in single power supply mode.
Learn how to write to files on your local computer so that you can save larger files using the Raspberry Pi Pico or Pico W in MicroPython.
Take advantage of the Zynqberry by taking the first step of porting your Raspberry Pi projects over to the Zynq platform.
let's build a custom Arduino compatible 8*8 led matrix
We show here how basic emotional responses can be captured by measuring GSR/EDA using ProtoCentral tinyGSR GSR/EDA sensor.
This project uses Raspberry Pi as an IOT device. It starts from interfacing sensor to publishing the sensor data to cloud server.
Line Follower Robot with Arduino and IR Sensors which follow the black lines
A quick tutorial on how to manipulate the example code for the buttons and LEDs on the Educational Booster Pack MKII
With no limit on number of plants and unique care parameters for each plant, this will ensure your plants are always well hydrated
A small form factor robot controller by a Raspberry Pi Zero 2 W and STM32 micro-controller.
Testing DS18B20 @ 98*C Hot water
This comprehensive tutorial will guide you through the process of setting up and programming the STM32 Blue Pill using the Arduino IDE
You can now use WoR flasher to install Windows 10 or 11 automatically on an micro SD card, SSD drive or NVMe SSD.... here is Pi5 option, now!
Follow these instructions to learn the different modes of SPI communication on an STM32 microcontroller with simulation in proteus
