Home-automation system along with Artificial Intelligence.
Pedro 2.0 is a compact, 3D‑printable, open‑source robotic arm designed to democratize robotics education.
Program Nodemcu/ESP32 board using Arduino IDE, using Esp as my first microcontroller
The UPS did not shut down the computer in the event of a power outage. This hack makes the UPS smarter, I made this circuit with ESP8266
Its a Scientific Calculator (4 decimal accuracy) with functions like +, -, *, %, Sin, Cos, Tan, arcSin, arcCos, aTan, log made using evive.
The EvilDuck Project is an open-source project designed to replicate the functionality of a keystroke injection tool, the USB Rubber Ducky
Simple single LED interfacing with arduino uno with delay of one second. Basic interface for monitoring purpose.
This article implements a strategy to evaluate agentic AI ROS2 nodes for robotic control.
A reference guide for installing the 2024.2 version AMD FPGA toolset on Ubuntu.
This project describes how to add support for ROS2 to the Tria Vitis Platforms.
Learn how to get the Raspberry Pi HQ (High Quality) Camera working with your Jetson device.
Using this preamplifier you can increase overall gain, tune frequency accordingly, enable dolby and drive one more channel for subwoofer.
Getting started with ATtiny microcontrollers
See how to integrate your custom FIR with Xilinx DSP IP such as their DDS Compiler IP.
This project deals on how we can implement a simple digital number lock based embedded system using a 4x4 matrix keypad and ATMEGA32
Implement an ESP32-based gas detection system with MQ-series sensors, real-time safety alerts, and a dashboard for environmental monitoring.
Programming the Raspberry Pi Pico using Arduino IDE is quite simple nowadays. Let's setup your one to getting started
A tutorial about setting up Jetson TX2 with TensorFlow, OpenCV, and Keras for deep learning projects.
This project walks through how to get started with command line development for the Raspberry Pi Pico on an M2 Mac.
The DIY ESP32 Cam Surveillance Car is a great way to get started with building your own surveillance car. This project uses the ESP32 camera
Making a Pi HAT for LED matrix displays.
Learn how to Implement ESP12F esp8266 based module in your PCB projects (ESP12F minimal setup and Its Programming)
This project demonstrates how to take a custom RTL module and add an AXI4-Lite interface wrapper to it for use in the Vivado block design.
The Arduino based project is an automatic school bell which rang according to input school timetable.
