Bazzite Setting up guide on a Lattepanda MU
For this project, I developed a basic LED blinking program on the RT-Thread RT-Spark (STM32F407) using STM32CubeIDE to practice fundamental
Olympics for the fingers.
In this second article, we attempt to reproduce the power measurements with an alternate strategy.
Autonomous RC car with lane detection, PD steering, encoder speed control, and object detection.
A FreeRTOS demo on the STM32 RT-Spark with four tasks: AHT21 sensor reading, PWM RGB control, counter updates, and LED blinking.
X1 SBC. This board is highly capable and comes with a rich set of peripheral resources.
Here, I will do photo comparing on a remote Raspberry Pi connected over a cellular module.
This was one of the most popular low-cost, high value-for-money 8-bit MCUs in the early 2000s.
90% IoT compression in 2KB RAM. Works where gzip fails. Open source.
We built a real-time system on the RT-Spark STM32 using FreeRTOS to read temperature and humidity, control an RGB LED, update a counter.
Study with ease by using this interactive timer with an implemented breathing exercise to reduce anxiety and boost productivity.
Morse code for computers. Your compiler knows the ASCII alphabet. You should, too.
This article is a technical deep-dive into Zidian, a hardware acceleration engine integrated into the Geehy G32R501 MCU.
In this tutorial, we delve into sending emails with the ESP32-S3 using Lua, focusing on the Xedge IDE's built-in SMTP configuration feature
A simple RGB Color Mixer for photography use, its powered by an Seeed XIAO M0 and uses three pots for controlling the colors.
Made a simple Gundam Themed PCB Brooch soldering kit
This project contains a thermocouple temperature sensor (H09R0x) with three Hexabitz RGB modules (H01R0x)
Rapidly prototype a web based UI on the MaaXBoard 8ULP.
Automate your lights with PIR motion sensing + WiFIRCard. ESP32-S3 powered, Wi-Fi ready, and dual-relay control in a credit-card size board.
Refurbish of an EV Bicycle I found on the street to making run again as new
A fingerprint scanner BoosterPack board compatible with Texas Instruments LaunchPad Devices. Here's how to build it from scratch.
Smart locker system using Raspberry Pi and face recognition. Only registered users can unlock door with secure admin PIN control.
A 1:10 RC AI car where a neural network does the driving and an embedded controller guarantees it stops.
