Implement seamless high-speed MIPI CSI-2 image sensor bridging and signal integrity using the Meticom MC20901 and FPGA.
Will guide you to build a DIY Real Time Claude usage tracker with XIAO ePaper DIY Kit (ESP32-S3) and 2.6in ePaper Display.
It can be used to improves sleep, mental focus, and the body’s overall performance by helping the energy output and regeneration of the body
A clock with a real rotating moon.
Transform the Compute Module 5 into a compact, open-source media streaming device with a surprising twist: LoRaWAN connectivity.
The affordable autonomous robot provides localization and mapping facilities and safely navigate the robot through the environment.
A 3D scanner that makes 3d models in a graphic interface .
A miniature gaming console that lets you play snake using only an ATtiny85 and a simple I2C OLED display.
Recycling trash and e-waste by combining traditional and digital crafts!
The movements of connected colleagues translated into a living artwork - using Adafruit Feather Huzzah, servo motors, plywood and paint.
This is for embedded software developers with a solid working knowledge of C or C++, but who struggle with large and complex projects.
An Arduino UNO made of DIP and through-hole components.
I wrote an ethernet PCB guide. Based on Wiznet's documents and chips. If you want to use Wiznet's Chip, please refer to it.
Allowing you to create user interface prototypes that combine hardware and software interface elements.
Quick and easy way to tell time and weather when getting ready!
A Mobile jammer circuit with high flexibility and minimum cost to prevent the usage of mobile communication in restricted or selected areas.
A simple way to make a multi-channel PEMF device that is used to make a special therapeutic bed, or therapeutic chair.
This project walks through the steps of how I designed my own custom carrier board for the AMD Kria™ K24 SOM.
This outfit has a solar panel on the shoulder which can charge a 5V device, like a phone, a speaker, a portable charger, etc. through USB.
This project will cover the development of a printed circuit board intended to drive a reflow oven.
Together with PCBWay, I developed these 3 Christmas ornaments.
This device displays the moisture level, temperature, and humidity level of the plant environment and plays a song when it needs water.
This innovative CO2 monitor for schools and offices helps to keep the virus away with an all new, yet very familiar design, a Wall Clock.
