Controlling home appliances using Bluetooth module
We access the bluetooth module to relay information and convey it via switching LED on/off.
A great project for beginners! You can play Dinosaur game not by pressing any keyboard buttons but by motion of your hand.
MCP2221 USB-I2C Converter | DS3231 High-Precision RTC Chip | TCXO | Inbuilt-Temperature Sensor | Cross-Platform Compatibility
KORUZA is a low cost, open source and open hardware, wireless optical communication system.
A small portable box that prints messages sent by a loved one.
Building a customized bluetooth controller using Arduino.
This project is about servo motors which are controlled by a push button. The servo motors only work when a certain algorithm is followed.
Use OSCUP in your project to speedup the development of a custom UART communication! It is an entirely customizable protocol
Utilizes an I2S mic and I2S amp using an ESP32 with the ESPNOW wireless protocol to communicate audio wirelessly at over 600+ meters.
Know what's going on at home from anywhere in the world with this IOT based security system!
Build a Twitter feed display using Raspberry Pi and a 20x4 LCD to get updates continuously without bothering to check your phone or PC.
Sleek and simple infrared remote that turns on your audio receiver / home teatre when TV is powered on.
This is an Arduino joystick(?) controlling 1 of the versions of geometry dash!
How to make a small FM Radio with oled display which all functions are controlled by a single rotary encoder.
Using Dot Matrix and Bluetooth to make a scrolling display.
A wide range RF detector 50-3000Mhz with battery charger, ATtiny micro controller and SMD.
Interfacing a proteus simulation with NodeMCU
Control and manage terrarium for geckos with Android, Arduino and Bluetooth.
Compact Arduino Calculator with keypad and you can take it on the go!!!
Remotely switch things and read data using ESP8266 Arduino and your website.
2.4GHz scanner/jammer/Channel Analyzer using the nRF24L01
See how to setup a Vitis software platform to utilize the lightweight IP (lwIP) stack for the Spartan-7 SP701 FPGA development board.
The Ripple Qwerty pager firmware has now been ported to the T-Display S3 Touch board, redesigned with a nifty touch UI!
