For this project we will use Arduino Uno and BMP280 along with LCD 16x2 display module to display temperature and pressure values.
This project measures the temperature, humidity, atmosferic pressure (and much more... ) and display then on a web page.
Build a simple IoT barometric weather station which is connected to the Internet via WiFi and controlled with the Sensate Monitor app.
Desk WeatherStation with esp8266, 1, 3" oled display, GY-BME280 sensor and Python-Flask web application for data visualization.
An automatic plant watering system that also collects environmental data.
Easy project to stream temperature, humidity and pressure data from from Bosch BME280, via a Raspberry Pi for analytics in SA Studio
Showing live Humidity, pressure, and temperature on OLED Breakout using BME280.
Monitor your HTTP Device on Thinger. io Platform. Easy Documentation to start in seconds.
Display temperature, humidity and pressure with current time on webpage and OLED display.
Smart flowerpot with ability to display temperature, humidity, pressure, and moisture sensor.
Log temperature & humidity 24/7 and get daily CSV reports via email automatically. Built with visual blocks - no coding required.
Extracting Humidity, pressure, and temperature sensor data, generated by BME280 controlled by the master Micro RP2040 board.
A system that reads the moisture in the soil. If the soil gets too dry, the system will turn on and water the plant itself.
Objective: Collect rainfall data i.e. intensity, frequency, total dissolved solids, Ph levels and rainfall sound.
Over-engineered with Particle Photon 2 to automate precise misting and reservoir cycles. Tiered sensor array, OLED display, cloud publishing
Three, ESP-NOW nodes; one for blower to trigger LoRa WOR, Node to send LoRa WOR and log data, and Node for Outside BME280 data.
