CMOS IC THA offers a settling error lower than 0.5% and minimizes dynamic power consumption to 10uW with a high gain and phase margin
Many times we need from the FPGA some signals for use it as stimulus for other circuits. This board brings us 4 analog outputs for Ultra96.
We are going to build a simple LED running circuit using an 9x9 LED matrix and two CD4017 decade counter ICs.
A basic breakout for the ADG732 32 channel multiplexer and video tutorial!
A battery powered alarm clock using the Nokia 5110 LCD display controlled by a ATtiny1614 processor and DS1302 RTC.
The First Open Source Mixed Signal IP Test ASIC
A basic project that describes the use and function of a capacitor in the electronic field.
How to improve on the stripboard oscilloscope we built in the last article.
A fun way to monitor your internet traffic!
This is a sweet little retro television that I've converted into a wall-mounted information station with interactive tuning control!
Control an analog gauge using an MSP430 and some simple logic.
Build a small portable electronics lab with an Analog Discovery and an Orange Pi PC Plus
Follow these instructions to learn about the efficient acquisition of analog data on STM32 through a comparative study of ADC modes
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.
Make a light based Theremin using a phototransistor to make sound, that can be affected by how much light hits, making different pitches.
Learn how to interface Nordic thingy:53 with ADS1115 an external ADC in order to read analog values.
Graph live data from analog sensors.
A library to use I2C analog IC with Arduino and ESP8266. It can read analog values and write analog values with only 2 wires.
This project walks through how to design analog filters with RC circuits and measure their frequency response in WaveForms.
A teardown and repair log of my analog phone that happens to be in the shape of a hamburger.
In this project the ADP3450 Oscilloscope/Function Generator/Logic Analyzer has been used to analyze various signals.
This project demonstrates how to use CapSense Entry/Exit interrupt callback functions to implement a FreeRTOS task based CapSense design.
A low-power e-paper clock with Roman/Arabic numeral toggling, real-time progress bars, and minute-by-minute updates, built on an ESP32
Monitor the Air Quality in your neighborhood with this attractive retro visual gauge for Air Quality Index!
