How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
An interesting nice looking analog style clock, which is also extremely simple to build.
A 555 timer Atari punk console for all the bleeps and bloops.
Think about how a numerical value of a potentiometer can be represented using just one character on the 7-segment display.
I built an analog circuit that would allow the phones to ring when the other receiver is raised.
An analog-style BMP180 barometer.
This project walks through how to create a custom hardware design in Vivado 2022.1 for the Eclypse Z7 with the new Digitizer Zmod.
Open source DC boost converter module designed around a single cell lithium battery: 3.7 V in, 5 - 24 V out.
In this project, I am going to demonstrate how to use a potentiometer to dim LEDs.
In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.
Add more analog inputs to your Arduino or ESP with the ADS1115
This Arduino Linear Actuator Tutorial shows how to control a Firgelli Small Linear Actuator using an Arduino compatible board.
Cool project to begin with 128x64 OLED, done with a twisted logic to fix the refresh flashing screen.
Turn your old oscilloscope into an analog clock with ESP32 and three wires.
ASIC implementation of the PicoRV32 PicoSoC in X-Fab XH018. It contains two ADCs, a DAC, comparator, bandgap, RC oscillator and other IP.
Coll of with a piezo and a glass of water
To complete the previous ADC article, now how use MCP4725 to generate an analog output.
Raspberry Pi has only digital inputs. In this article we read analog data through ADC over SPI.
How to convert from analog to digital signals and vice versa using simple Python on microcontrollers.
Vary the voltage to your LEDs, motors, and other electronics with high efficiency using PWM.
A real-time Analog Clock using 1Sheeld Graphical LCD.
Generating Sine, Square, Triangular, Sawtooth Waveform with Direct Digital Synthesizer method using PSoC 4 MCU and few passive components.
You want to measure an analog voltage or Need to add analog inputs. Today I show you How to Interface MCP3008 with raspberry pi for measuri
How manage an ADS1115 to acquire 0-5 volt analog input with Raspberry, PowerBerry and Windows IOT.
