Within less than 15 minutes build smart Raspberry Pi based Smart Home Environment Sensing and Humidification device
This CanSat was built by "TeamAir". For our secondary mission, we studied the influence of altitude upon the quality of the air.
An air monitor that you can connect to using Cayenne, accessible anywhere in the world!
If you've wanted to measure the air quality at your workplace, look no further.
An air quality meter's light will change based on the air quality value detected. Air quality data will be uploaded to a cloud's dashboard.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
A desktop "bladeless" fan that uses a 1100KV brushless motor and it's powered by 12 V DC.
I built a simple to use air sensor that also features an indicator light and temp/humidity sensing. I included lots of options for posting.
See the Air Quality Index (AQI) at a glance to determine if it is safe for you or your loved ones' environmental to be out.
Using the NXP Rapid IoT Kit, the quality monitor will be of a smaller form factor, and connected with a Pi for remote monitoring.
Are you interested in monitoring your house air quality? You can do it in very easy few steps.
Air quality and smoke(fire) detection for urban canyons to provide early detection of brush fires caused by transients or other causes.
Room Air Quality Checker
Build a smart air monitor with Infineon's CO2 Sensor & Bluetooth LE chip! Easy DIY, real-time data, greener living, better breathing!
Monitor the Air Quality in your neighborhood with this attractive retro visual gauge for Air Quality Index!
Displays pm2.5 values and calculates AQI index values on TFT and LED RGB bar(Ws2812) use micropython.
As the "Canary in the coal mine" this Bird indicates the air quality, sitting on top or falling down.
A simple personal indoor air quality (IAQ) monitor device based on the Nordic Semiconductor nRF5340 Development Kit.
A compact and portable device for monitoring air quality in your surrounding, even for indoor air quality check
The purpose of this project is to build a simple air quality sensor that will monitor the eCO2 and TVOC levels or it’s surrounding area. The
Using air quality metrics, effective forest fire detection and planning can be achieved.
Contributing environmental data to Sensor.Community using LTE-M
Monitor real-time smoke/PM levels in your area with a Raspberry Pi
The air in your bedroom are important for a comfortable sleep. A fan is attached to the window of the bedroom and automatically controlled.
