This innovative CO2 monitor for schools and offices helps to keep the virus away with an all new, yet very familiar design, a Wall Clock.
Build a full-functional small IoT device to monitor inhouse air conditions without using cloud services.
Build an affordable device that tests how well a face mask can protect from particulates. Record quantitative data (PM 1.0, 2.5 and 10.0).
Video-Tutorial about the SGP30 multi-pixel gas sensor designed for easy indoor air quality measurements.
Measure your indoor air quality (temperature, humidity, CO2, VOC) and visualize data in the cloud using Particle and Ubidots.
Quickly capture data from various sensors in CSV format and use a spreadsheet to make a simple analysis of the general behaviors and trends.
Connect a particulate matter sensor to a Raspberry Pi to trigger a DIY air filtration system.
Build an ePaper air quality dashboard with the EE05 board and Home Assistant to check air quality at a glance.
Air Quality Monitoring System—designed in KiCAD and powered by Grok AI! This hands-on project teaches you end-to-end hardware design.
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
Know the Indoor Air Quality (IAQ) and CO2 measurements for the room you are in using the new Arduino Nicla Sense ME!
Raspberry Pi Air Monitoring HAT | Real-Time PM Sensor For Raspberry Pi can be used to monitor real time air quality of your nearby areas.
Craft your own Air-Quality & Weather Monitoring Drone: DIY tech meets environmental awareness. Build, sense, explore, and contribute!
A review of the Grove - Dust Sensor (PPD42NS) from Seeed Studio.
Studies have shown that CO2 can impair your cognitive abilities. Create awareness of indoor CO2 levels with this fun project.
This is a simple weather station that can measure PM 1.0, PM 2.5, PM 10.0, CO2, TVOC, humidity, pressure, and temperature.
Measure the air pollution with a PM sensor, tracking the PM10, PM2.5, as well as the PM2.5/PM10 ratio and GPS position.
I have designed a board to monitor air quality inside your house. you can connect with Home assistant too.
7 Raspberry Pi stations, Tailscale VPN, InfluxDB on NAS, Grafana. Real outdoor data. Running 24/7 since April 2024.
How to Make MP2.5 & Co2 Detect Wall Clock for Indoor using Arduino, MG811, GP2Y1014AU Sensor
Monitor your indoor air quality with a Raspberry Pi and the Rehau USB stick.
Air Quality Monitoring System Using Wio Terminal and PM2.5 Sensor
In my basement I want to install a pair of Ventilators, controlled wireless depending on relative humidity and temperature.
Having a CO2 sensor, I wanted to have a better visualization than a small display, so I started sending environment data to prometheus.
