Hardware and Software products

The MAXREFDES89# is an mbed®-compatible, Arduino® form factor shield, ideal interface for anyone developing with brushed DC motors.

A little case to hold your mcMod120. Comes with an additional magnet enclosure (magnets included!) so you can use the built-in Reed switch

Designed for IP video surveillance, provides high endurance support for 3 years of high-quality, continuous 24/7 video recording.

Handy accessories to get you started with micro:bit!

An unashamedly old school LED matrix display board using the beautiful little Lite-On LTP-305 matrices.

Gives you multiple ways to mount your switches, adjustable along the length of the linear guide. Mounts to V-Slot or compatible extrusion.

Microsoft and SparkFun have teamed up to bring you some IoT (Internet of Things) fun. The Microsoft Azure IoT Starter Kit for the SparkFu...

This kit demonstrates a complete embedded display system, allowing for video output to an integrated 10-inch LVDS display.

The Breakout Carrier Card is the simplest, least expensive way to enable the PL I/Os on the MicroZed SOM.

The MicroZed Embedded Vision Development Kit builds on the MicroZed SOM by providing a video specific carrier card. The kit includes hard...

Small bearings that can fit a variety of projects, such as filament extruders. Standard 5mm ID bore.

Need to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you!

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin Molex connector wit...

The momote001 is the first of many steps that will be given until it is completely feasible to the Internet reaches in anything.

a virtual assistant for developers to create their own voice enabled applications to interact with consumers in natural language

These mounting hubs are awesome for mounting, to gain a strong connection to a set screw locking shaft hub.

A cloudless Speech Recognizer / Voice Synthesizer for the Arduino platform

The original MPLAB Xpress Evaluation Board (p/n DM164140) features the versatile PIC16F18855 MCU, which supports a wide range of embedded...

The Pixhawk XRacer board family is optimized for small racing quads and planes with built-in wifi.

The MSP-EXP430FR4133 LaunchPad development kit is an easy-to-use evaluation module for the MSP430FR4133 microcontroller.

256kB of FRAM memory!

The Multi-Sensor Board enables prototyping of devices for asset tracking, wearables, smart home and other smart sensing devices. NOA1306

MyOctopus OPT 3001 Ambient Light Sensor (ALS) - Human Eye Precision : 0.01 lux to 83k lux - 12c: 0x44 0x45 0x46 0x47 -1.6 V to 3.6 V

NuGet with nanoFramework System.Net Class Library.

Linux autopilot on Raspberry Pi

The NCP110 offers a unique combination of very low voltage, low noise, high PSRR and low quiescent current.

Take your projects to the next level with more power and strength with this new high torque 345oz/inch NEMA23 stepper motor.

NeoDigito are the alternative for conventional seven-segment displays and LED matrix, mainly for big size displays.

MINI_PROTO is an M5Unit size of universal prototyping board. Smaller than the PROTO unit.

This product was replaced by a updated version NFC Shield V2

Node is a base as a intelligent node in the IOT.

Carrier board for Atlas Scientific EZO line of sensors.

The nRF9160 Feather is a true Feather, and then some, board.

This 8mm Acme Nut Block is a great choice for many projects requiring lead screw linear motion.

These microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.

A laser-cut robot kitten that runs and learns from you.

This handy little locknut is included with each of our Wheel Kits. They are super affordable and will work with M5 screws.

SERVO DRIVER

A cute, connected, cephalopod camera to stick on your window or sit on your shelf!

Supports 3 major platforms. Can easily evaluate various sensing functions.

OpenEdge is an open edge computing framework that extends cloud computing, data and service seamlessly to edge devices.

Kick start your IoT ideas with the Orange Maker IoT platform.

the perfect opportunity to build and have your very first walking Bluetooth control robot NO SOLDERING REQUIRED!

Otto DIY Humanoid is a step forward into the robot revolution, it can do all the same features his predecessors do but now includes arms.

Credit card sized hacker board with 18 RISC cores, FPGA, and GigE, 24x 1Gbps IO, USB, HDMI.

Pepper 43R is based on a TI Cortex-A8 processor (AM3354) w/ WiFi and LCD header. Supports Yocto Project build system and Android.

The P4M-400 is a module type of PHPoC IoT Board. It is designed to be integrated into other products

Stepper motor controller is a PHPoC smart expansion board for stepper motor. You can easily control stepper motor by using this board.

With Stepper Motor Controller Ⅱ, you can control a stepper motor more precisely. It supports microstepping up to 1/32.

The phyCORE-iMX 8M Mini System on Module combines best-in-class performance and low power consumption with minimal size and affordability.

The ultimate desktop retro arcade machine! Picade is a Raspberry Pi-powered mini arcade that you build yourself.

For connecting a chipKIT board to the Microchip PICkit 3 debugger/programmer.

The Pico SoM is a 36x40mm, high performance platform that is highly optimized for Internet of Things applications. It is pin-compatible w...

The PICO-IMX7 design based on the NXP i.MX7 processor is a purpose-built, small footprint hardware platform compatible with Intel Edison ...

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7.Included in the pack is a USB Type-C cable for p...

PicoZed™ is a highly flexible, rugged, System-On-Module, or SOM that is based on the Xilinx Zynq®-7000 All Programmable (AP) SoC. It offe...