Hardware and Software products

Speed 2Go is a budget-priced evaluation board featuring a complete speed sensor including back-bias magnet, USB connector to PC and a GUI ba

Just write code - Spotinst Functions will handle compute provisioning, ensuring you pay the least possible for your compute costs.

Control your Hunter Irrigation sprinkler system with the Sprinkler Shield.

STEPMOTOR is a module for driving step motor built in MEGA328P MCU which has been burnt GRBL firmware used to control stepper motors.

A 96Boards mezzanine board based around the STM32F446 MCU (named B-F446E-96B01A)

Straity Link is a desktop application used to develop and share Stratify OS board support packages and applications.

The ΣyG-S7G2 System on Module provides a quick and easy solution for implementing Renesas Synergy™-based design.

A powerful, easy-to-use modular synthesizer that helps you unleash your inner rockstar.

The module to insert DRV8824 o A4988 drivers for stepper motors and has 2 exits with MOSFETs to drive motors, relay or hot wire in PWM.

Theremino - Distance sensor CapSensorHQ.

A matchbox full of sensors, a light and a button. Show off, or just connect this bunch of sensors to your IFTTT account – it's up to you.

thingSoC NeoLED Expansion Driver makes driving large arrays of NeoPixel (WS2812) LEDs as easy as writing to an external I2C memory array!

RUBIK Pi 3, a lightweight development board based on Qualcomm Dragonwing™ QCS6490 platform, is the first Pi built on Qualcomm AI platforms f

These awesome little spring belt tensioners are the perfect solution to a loose belt on your builds.

This is the standard Tinusaur Main Board version 3 - LITE edition.

The bare essentials to get going with the TinyDuino! This kit comes with a TinyDuino processor with the coin cell battery holder.

A standard size LED in an extremely compact size of 10.2mm x 4mm, with two standard TinyLily sewtabs and a current limiting resistor.

Based around the 2x2mm TI DRV8837 Motor Driver (H-Bridge) IC, this board is only 10mm in diameter, yet can drive a 5V motor!

Connect your TinyDuino system to any compatible iOS or Android device using Bluetooth Low Energy (Bluetooth Smart/Bluetooth 4.1)

This TinyShield has two analog joysticks on both sides as well as two push buttons along the top to create a controller for your TinyDuino.

This proto board brings all of the TinyShield signals out to a point that you can solder to.

The TM4C line of ARM Cortex-M4 microcontrollers from Texas Instruments

Make interactive projects in no time, whether you’re a designer, engineer, or creative.

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?)

The first fully-programmable contact center platform.

A compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets

Very small, narrow-DIP-sized, Arduino Zero compatible USB development board with integrated buck and boost power supplies.

The platform designed for IoT and M2M projects providing device management, API, Big Data analytics, and marketplace.

UDOO X86 is the New PC: the most powerful x86 maker board ever and an Arduino™ 101-compatible platform, all embedded on the same board. O...

The UltraZed™ IO Carrier Card supports the UltraZed-EG™ System-on-Module (SOM), providing easy access to the full 180 user I/O, 26 PS MIO...

This module makes available two serial devices on USB, one for Cortex A9 and one for Cortex M4.

The SIGFOX shield evaluation board demonstrates the AX-SFUS, a single chip solution to create an ultra low power node on the Sigfox network.

Open Hardware Air-Quality USB sensor dongle with configurable output format (JSON, CSV or human readable) over USB-CDC

Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel.

The Vision AI-KIT 6490 features an energy-efficient, multi-camera, SMARC 2.1.1 compute module, based on the Qualcomm QCS6490 SOC device.

The latest generation of Visionect System Boards, refined through years of in-the-field experience.

Modular and can be connected to one another to build all kinds of cool and interesting machines.

Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE Compatible with standard Arduino/Seeeduino boards Micro-SD card

The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit...

High performance, PCIe Gen3x4 NVMe SSD that ranges in capacity from 256GB to 2TB

Wio Link Event Kit is an event-monitoring kit which includes some typical event-triggered Grove functional modules to build smart IoT device

Feather form factor RISC-V development board based on GD32VF103, with the onboard ESP8266 Wio Core, also featuring WiFi function.

The Wio LTE Cat M1 / NB1 is an exciting IoT focused addition to our Wio cellular series which will provide you a more convenient IoT design

RAK2245 Pi HAT & Raspberry Pi 3B+ & WisTrio LoRa Tracker & 16G TF Card(with software image) to quick start a LoRaWAN application

WisLTE Quectel BG96 NBiot Arduino friendly board, Support LTE Cat M1,CatNB1 and EGPRS module, nb-iot, Arduino Shield Compatible

The RAK7204 is a LoRaWAN node that serves as an environmental monitoring station.

The RAK7205 LoRa tracker board is built upon the RAK811.

Reliable sub1GHz - 6LoWPAN devices for Network and IoT applications, with a powerful Cortex M3 onboard.

This kit enables a broad range of transceiver applications for wireless communications.

It measures the concentrations of Total Volatile Organic Compounds (TVOC) and can estimate carbon dioxide (eCO2) levels.

The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures.

This shape will make a 6 sided Hexagon

This ultra low profile Power Supply delivers 12 Volts with 29 Amps. This is the ideal Power Supply for most electronic setups.

This shape will make a 8 sided Octagon

This high quality aluminum flexible coupling can be used to connect your stepper motor to your lead screw.

This module is high contrast, wide viewing angle triple-color e ink Display for Raspberry Pi.

This ultra low profile Power Supply Set delivers 24 Volts with 14.6 Amps. This is the ideal Power Supply for most electronic setups.

This module is high contrast, wide viewing angle triple-color e ink Display for Raspberry Pi.

These heavy duty mounting plates are perfect for any project requiring connection strength.

2x20W Amp click carries the MAX9744 stereo class D audio power amplifier from Maxim Integrated. This click brings the Class AB sound perf...