Control an Arduino car using an Android App installed on your mobile phone using Bluetooth
To know how much water is left in a cistern to watering the garden, push the data to the Apple Homekit
You no longer need an external monitor, keyboard, and mouse to get started with Raspberry Pi, there's another solution - headless mode.
Use this guide to share your USB printer over your network using a Raspberry Pi (or other SBC) and print from any device on your network!
In this blog, I am going to show you how to Make a Smart Unlock System For Motorcycle. This is a great project
In this tutorial we will explore Wireless Communication and learn how to control servo motors using the NRF24L01 modules, joystick.
We will use the E32 LoRa module. E32 is a 1 Watt LoRa high power module. We will also take a look at its breakout board.
ICStation team introduce you the Infrared Wireless Temperature Transmission Alarm System based on the ICStation UNO R3 Board.
Use a browser based interface to control a Arduino Car over a WiFi network from your laptop, tablet or Smartphone.
A fully integrated matrix LED display with microcontroller wi-fi connected and motion detector sensor.
Easily check for WiFi drop out points, WiFi dead zones using this ultra portable device.
This project shows how to use the RAK DashButton to create a safe, Wifi based switch to control your electrical appliances.
This tutorial covers how to use a USB Wi-Fi module commonly used with Raspberry Pi boards to add wireless capabilities to the Zynqberry.
Bringing NFC contactless payment capability to a true classic.
Transduce the 12 VAC to a digital switch attached to your favorite HW platform.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
Instead of programming CY8CKIT-049-42xx PSoC 4 through USB, program it wirelessly via Bluetooth-UART link with HC-05 module.
Interfacing an Infineon Distance2Go radar sensor with a cybt-213043-mesh Bluetooth LE device to create a radar obstacle detection system.
In this project, we will create an email alert of machine vibration and temperature using the ThingSpeak+IFTTT-vibration sensor and ESP32.
This tutorial will give you the basic understanding of running the 6LowPAN stack on the RAK iTracker using the Zephyr OS distribution.
In this, we will measure temperature and humidity using NCD temperature and humidity sensor, ESP32, and ThingSpeak.
Pycom software and firmware over the air update manager using Resin. Pycom devices can connect to a resin gateway and update, wirelessly.
improve lung capacity and breathing techniques by playing game of blowing virtual balloon with portable wireless pressure sensor.
Get started developing with the PIC-BLE and AVR-BLE development boards.
