Built a smart Li-ion charger with 10-LED fuel gauge. Features BQ24075 for charging & LM3914 voltage monitoring. Full build guide available!
Sending environmental data to Ubidots using RAK1906 and RAK13101 GMS/GPSR module
Arf154 is an Arduino compatible wireless-ready board.
Debugging of WisBlock with the Arduino IDE and WisBlock
#DonLuc #Robotics #XBee #Electronics #Consultant #Vlog #Aphasia #Microcontrollers #SparkFun #Fritzing #Programming #Adafruit #Arduino
Obsessed when miss a call from your boss or loved one!Get an alert from Bolt IoT using IFTTT recipe.
A TinyCLR + Seeed LoRa-E5 module based LoRaWAN client. Tested on The Things Network (TTN) and The Things Stack(TTS)
Control your PC from your phone with an ESP32-S2 HID device, featuring mouse, keyboard, and system commands over WiFi.
let's make
Controlling a servo with wireless
This project will guide you to create a wireless sdcard at home
Energy meter, environmental sensor data monitoring and load control with Parrytech LORAWAN gateway and LoRa nodes.
This project designed a pet position detection and speech hevaior correction system. Which based on ESP32-S3 and OV2640 image sensor board.
Basics of MQTT communication for smarthome development. Learn background, setup, and message publishing and subscribing.
This Project Is Made To Avoid The Fire Accidents. This Project Will Help Us When There Is Fire In Any Place, Sms Is Sended When There Is Fire
This project demonstrates a wireless garage door control system using LoRa communication between two ESP32-based nodes. The system uses the
A mechanical reeling mechanism to pull down door handles and unlock them. Complete with full wireless capabilities for triggering remotely.
Made an underpowered, Low Efficient Wireless Energy Transmission system entirely out of PCB.
You can rotate the fan left and right, tilt it up and down, control the fan and rotation speed, and set start and end positions of rotation.
915MHz RF Filter Module (10mm by 12mm) with u. fl rf connectors for improved LoRa, SDR and ISM band Receiver Interference performance.
This project demonstrates how to build a fully functional, battery-efficient wireless keyboard for a PC using an ESP32 and an ILI9341 touch
A fully secure receiver and transmitter pair works on radio frequency, Control the things wirelessly without internet, Wifi and bluetooth.
In this brand new DIY project i'll show you how to make a phone Loss Prevention device using just 3 low cost components
A wireless transmitter without battery, works on EV1527 encoding scheme. Radio transmission with fully secure wireless channel.
