Turn your Android phone into a free AC and DC clamp meter using its built-in magnetic sensor. Measure current on single wires or two-core ca
Fifteen free calculators and pinout charts for makers. No signup, no ads.
A tool that helps makers and professionals level their FDM-based 3D Print Bed
Inductance meter on favorite ATmega328P-PU running 16 MHz.
skiiiD Editor is IDE for development boards. Now, it supports Arduino Uno and Mega with 70+ modules.
Made an SMT hotplate completely from FR4 PCB.
A compact, powerful, and fully DIY mini drill with battery + adapter power!
I made a tool to program the Arduino Pro Mini without the need to solder pins to attach the USB bus port.
This project walks through how to install AMD's FPGA development tools on Ubuntu 20.04 & 22.04 LTS.
I was able to modify Adafruit's Freq Show program to enable it to run on the pocket CHIP.
A circuit for writers and bloggers that prints words or sentence on press so you don't have to type keywords in document multiple times.
Automatically turns on and off your solder fan when you remove your iron from the holder.
In this tutorial we will learn how to make a simple mosquito repellent using arduino and a piezo buzzer.
Sorry - this is not a hardware project, by maybe it helps you as much as it does to me and lets you edit a config. txt file with more fun...
A Pen Holder made from PCBs and 3D Printed parts in an OverEnginnered Way.
Rebuilding the PIC Inductance meter on STM32F030.
Soldering needs to be done in a well-ventilated environment or a Fume Extractor should be used.
I have a little paint booth in my shop, so I created a device to shake paint cans for me.
Made a bench PSU from scratch using the ZK-4KX DC-DC Buck Boost module and a 3D-printed body.
This project walks through how to install the 2026.1 version of the AMD FPGA tool suite on an Ubuntu host PC.
Ever wanted to build custom battery packs for, solar power banks but found commercial spot welders too expensive? I've got the best solution
Create and connect to a Jupyter Notebook server on your Raspberry Pi to control your MATRIX Voice or MATRIX Creator!
WIND is a project accelerator for the Adafruit Feather series microcontrollers. It turns them into easy to mount and wire together projects.
Raspberry Pi Docker Box - Start and Stop containers with a button
