Arduino auto-ranging ohmmeter using Pro-Mini & Oled display. Live Test: 56K ohm resistor shown.
A standalone portable and ruggedized electronics lab bench!
This project walks through basic RF testing for hardware/software verification of SDRs on the Ettus B205mini USRP.
A tiny function generator built using the ATtiny1614 microprocessor and its internal Digital-To-Analog Convertor (DAC).
Learn how to build your own lab power supply, decade box, function generator and oscilloscope.
It's a simple, handy device for testing Nixie tubes and Nixie tube drivers.
Build a circuit that will quickly test AA, AAA, 9 volt and coin cell batteries.
This project compares inferencing MobileNet and EfficientNet-Lite on the Coral dev board vs MaaXBoard and Raspberry Pi.
Many times we need from the FPGA some signals for use it as stimulus for other circuits. This board brings us 4 analog outputs for Ultra96.
Ever wish you could use BNC cables or probes with the XMEGA Xprotolab?
Automatic tap tester based on a Particle Photon, relay shield, lift magnet, boring socket for stylus fixture and Paperino ePaper display.
Diagnose the type and integrity of USB and RJ45 cables with this Touchscreen Cable Tracer. Appearances can be misleading with cables!!
See how to script a series of test measurements for automated testing on the ADP3450.
A minimal, powerful, robust tool for electronics component measurement with auto component detect function.
This project walks through basic RF test measurements using the Zmod Digitizer with WaveForms from Digilent.
This device will test and heal all Nixie tubes you know.
Design, develop and validate an open source water testing platform to perform Nitrate Reductase Nitrate-Nitrogen Analysis Method.
Electronics is fun, testing is fun, let's make it funnier with a Regulator tester with Faces! :)
HIL devices are excellent for real-time simulations of electronic circuits - in this project I show you how you can create your own!
Introducing my DIY function generator project: a compact, low-cost waveform generator built around the versatile LM324 quad op-amp IC.
This project walks through how to use a Zmod Digitizer with WaveForms to make measurements that validate basic modulation schemes.
This project walks through how to use the logic analyzer function in Digilent's WaveForms software to prove in a custom bit bang interface.
As with anything that you build, you have to test it, most of the tests are relatively safe and harmless. This test is an actual attempt.
In the development of electronic devices, the task of functional testing of the device at different supply voltage values often arises. Fork
