With Arduino + OLED and LCD
An air quality (particulate matter) and environmental (T/H/P) sensor system built with a Raspberry Pi Zero W, Python & Redis.
First, we will simply show some data on the screen. In the second example, we will show DHT22 sensor data on the LCD.
Simple weather station Arduino UNO: measures temperature, humidity, air pressure using BMP280, DHT11, windspeed 3D-printed anemometer.
Low cost smart vitals wearable which can help in early detection of COVID-19 in front line workers
The project is a beginner guide to interface sensors to Arduino and visualise sensor data through Processing
A step by step guide of creating your very own weather station at home. You can choose to use sensors or just use an API to collect data.
In this article we setup a Particle Photon module to monitor temperature throught the SI7020-A20 temperature/humidity mini module sensor.
It is a project to measure temperature inside refrigerator by bolt wifi connected to LM35 sensor to get notified when anomaly occurs.
I decided to write this tutorial because the manufacturer's website contains some errors regarding the use of this board with Circuitpython.
To prevent burn injuries from hot appliance.
Build an inexpensive network of web-connected temperature sensors using Raspberry Pi Zeros.
You should never leave your 3D printer unattended... but you do. This device will cut power to your printer when it senses thermal runaway.
Single channel LoRaWAN gateway using Seeed studio Wio-E5 Module, ESP8266, And Blynk.
This tutorial will show how we can send a text message using the ESP8266-01 WiFi module.
Learn how to add a Cellular IoT device to the Raspberry Pi Pico.
A detection tool that allows people in offices, schools and universities to monitor their employees and students' temperature.
Will guide you to build an Outdoor Weather Station with DFRobot FireBeetle 2 ESP32-P4, Five Sensors, and a Live Web Dashboard
A basic controller to turn on/off two sets of lights and display temperature on LCD and RGB LED which shows if its in the correct range.
A Python script monitors CPU temperature and controls the fan using on-off control with temperature hysteresis.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
ESP8266 Sensor Board powered by a Battery, monitoring Soil Humidity and Temperature. Data are been published at Cayenne MQTT server.
Use Bolt IoT kit and Arduino Uno to make your own anomaly detection & temperature monitoring device in both modes, i. e online and offline.
In this Project, I will write about how you can make a IOT Project using Firebase Realtime database and NodeMCU
