Easy to use educational shield for Arduino Uno
Our project will quickly read temperature, store online to the cloud, and then display the temperature to you on a different Photon!
iBLOPPER is activity fermentation logger to be attached to your (S)airlock. It works by detecting tiny vibration when a bubble is released.
Using an ESP8266 NodeMCU to check doors and get Temp and Humidity.
I will design a practical temperature controller that controls temperature of any device.
Follow these instructions to learn how to interface the TC72 temperature sensor with an STM32 using the Serial Peripheral Interface (SPI).
Use IOT to detect errors in the night setback function of your heating system and save costs through effective heating settings.
Every second should have a value.
This project shows how to read temperature & humidity from TH02, HDC1000 or HTS221 and send ThingSpeak using ThingSpeak library for PHPoC.
This is a semi-outdoor temperature & humidity monitor that runs on 3.7v batteries. I say semi because it needs to be protected from rain.
MAKERFACTORY ESP32 Evaluation board provides both powerful ESP32 and many useful IO. Measure Temp by DS18B20 & show on OLED display.
LM35 sensor is used for sensing the temp inside refrigerator. If there is an anomaly in temp, i.e. door is opened, It will send an SMS.
A basic guide for the developers to plot the graph on sensor data on their own servers.
ThingSpeak offers a simple and fast way of collecting your data
B-Hive is an autonomous electronic monitoring device enabling beekeepers to oversee their hives' well-being.
An introduction to microcontrollers for primary school students.
It is a convenient device for detecting the barometric pressure and temperature using the Wio terminal.
Add a quiet fan cooling system to existing equipment with this configurable controller.
In this project you will learn how to build a system to function as a temperature indicator for Arduino.
Uses the Pimoroni enviro pHAT to log specific values to an O365 Excel worksheet.
With the 1-Wire bus, several sensors can be connected easily and at runtime. Like in this example with 6 temperature sensors.
Sending DHT sensor data from NodeMcu to IBM IOT cloud(Bluemix) with the help of unsecured MQTT protocol
Unfinished BLE thermometer that I need help finishing the code to connect with IShield interface on iOS.
Adafruit HUZZAH32 ESP32 Feather Adafruit SHARP Memory Display Adafruit DS3231 Precision RTC Feather RHT03 Humidity and Temperature Sensor
