SCADA for load shifting with my 21 KW hour battery. Featuring Google charts script generated by the ESP32.
The solar panels generate the most electricity when the incoming light is perpendicular to them. A solar tracker rotates the panel along one
This weather station is based on the esp8266 microcontroller and sends all the data to Thingspeak.
Something for your boring lectures.
In this experiment I will describe you a way where the light from 10W Power LED diode is used for tarnsfering Audio signal wirelessly.
Extension of my previous project, "Solar Power". I am a beginner on this project, so I need some help knowing about what battery to use.
Automatically feed all excess solar energy, and only excess, into existing electric heaters.
Project places a 96Boards SBC, battery, solar unit, LCD panel, & standard electric sockets in to an enclosure that can be deployed anywhere.
EPEM ESP32 ATM90E32 ATM90E36 Ethernet Power Energy Monitor SDK
Are you tired of wiring up your LEDs to a power source? Paying for electricity? Forget about wall outlets -- solar energy is free!
A solar panel system that tracks and broadcasts the position of the sun to several other slave systems to achieve better power production.
The project describes the design of a sun tracking algorithm for capturing the maximum amount of energy from the sun.
We use the place under the terrace as Stone Built Garden House. There is no heating. This is an older project of mine.
MPPT based IC, which tracks the power point and charges the battery with a max rating of 1A, in the form factor of TP4056.
A smart, solar battery charger module with all of the protection features. It can charge the battery with a rate of max 900mA.
Our device was a self-powered, wireless sensor node for use in Internet of Things applications.
Compares solar irradiance performance between fixed system and a tracking system
Upgrade your solar heating with MiniPLC, ESPHome & Home Assistant—smart control, real-time data, and energy efficiency in one system.
Music powered by the sun...and lots of it.
Simple Single Axis Solar tracker.
Signaling bike movements with inductive wireless system using detachable leds in the bike sweatwear.
DIY Solar Power Meter is a low cost ESP32 based handheld device to measure Solar Irradiance, Tilt, and Azimuth
ESPuno Pi Zero is a STEM Maker and Developer SDK board based on an Epsressif ESP32-C6, featuring a wide operating voltage of 5-60V RS485 DMX
Multi-functional, solar powered streetlight designed to fashionably improve visibility as well as offer generic information via IoT
