This project focuses on creating an accurate bike speedometer using a GreenPAK™ IC and a magnetic sensor.
With lots of us working from home and closing the door to shut out everyday life then CO2 levels could be making you grumpy, sleepy, or sad.
Ready to flutter? Let's go then. In this project I will connect KNX temperature sensor to Google IoT Core and send pushes if something wrong
Easy to make third eye setup made with a Round LCD powered by an ESP32 Board.
The Ultimate Brushless Advanced Sumo Robot! in this project you will learn how to build the best Sumo robot in the world!
Cheap & easy alarm-system.
Sample Temperature Sensor on Intel Edison in Node.js
Learn how to measure ambient light for smart lighting control using the Raspberry Pi Pico and the BH1750 Light Intensity Module
Avnet's Renesas ZMOD4510 Outdoor Air Quality HAT measures nitrogen dioxide and ozone while consuming very little power
Follow these instructions to learn how to seamlessly integrate the MAX31855 thermocouple interface with STM32 microcontrollers
A smart solution for demands on watering plants.
A Raspberry Pi powered capacitive touch Pong game that you control with your hand.
Speaking Through Breathing: An intelligent communication system for the paralyzed.
UV and temperature monitor with Bluetooth speaker that prevents exposure to dangerous levels of UV rays through notifications and reminders.
Building a touchscreen mouse from scratch is more complicated than you'd think...
Distinguish between metal and non-metallic objects using Core Independent Peripherals (CIPs) in the PIC18-Q71 family of microcontrollers.
Bring internet connectivity to Arduino using Cricket.
Automatic/Smart Cabinets that are voice activated through a custom Smart Home network.
Air Quality Monitor gives you information about the temperature, humidity and carbon dioxide level...
Set an alarm when it's too hot, or detects motion, or detects an obstacle.
This project is a Zigbee End Device designed to operate as a battery-powered contact sensor (for doors, windows, or similar applications).
Made a Fume Extractor by using a custom Attiny13 Based Motor driver board and 3D Printed Body,
This is a monitor that converts atmospheric conditions into traffic light signals that rate urgency of response needed.
In this project, I am going to be using Arduino and Python to control the VLC Media Player with just my hands.
